first problem with my a1

[MuPpEtMoWeR_569]

well last weekend i went to practice and my gun would shoot one ball then the bolt would stick then it would shoot a ball then bolt would stick on and on.My settings are rage/joy 2.1 softwear lpr is stock any ideas b4 next practice?

[tgallo]

try to loosen the 2 grub screws that hold the breach pins in

[Fudde]

have a look at the pin on the bold, maybee the pin is loose try to push him in till it clicks.

[AAXplosionnn]

put a drop of oil in ur asa and then dryfire it might help

[Backman]

Raise your ABS (anti bolt stick) setting. Worked for me.

[KEN CRANE]

look at the exaust stem to make sure it is in god condition. then look at the body of your gun to see if the breach hascontacted the body and left 2 tell tale marks. 1 on the breach and 1 on the body near the front

[KEN CRANE]

look at the exaust stem to make sure it is in good condition. then look at the body of your gun to see if the breach has contacted the body and left 2 tell tale marks. 1 on the breach and 1 on the body near the front


follow my suggestions and re post

[MuPpEtMoWeR_569]

no marks on the breech and the stem looks good

[KEN CRANE]

no marks on the breech and the stem looks good

pull the pin out a slight bit from the bolt aprox 1/32 and retry

[MuPpEtMoWeR_569]

still no bueno ken who is the closest person i can send my gun into for warrenty(sp) work

edit:im in florida

[MuPpEtMoWeR_569]

also, this problem is only with paint inside the gun when it dryfires its fine.

[MuPpEtMoWeR_569]

still having this problem if i cant fix it where can i send it to be fixed.

[Talon]

I think All Star Paintball in Indiana is the closest MT to Florida, but it's pretty much a draw between them and Impact Paintball in New Jersey. However, Ken Crane from Performance Angel is the MT that has been offering advice so far. Give him a call at his shop and go from there.