Angel Shooting Hot !

[madgti]

Hey Guys,

My Cobra FLY is shooting like 370 then it drops to 340 then 360 and 320 on the Chrono. My reg is turned all the way down and i mean all the way down until the screw is poking the other side of the reg.

The dwell was at 8 and we increased it to 14 slowly and somehow it went to 250, then 280, and 220 on the chrono. I also need to mention ever since the dwell has been set to 14 the gun is now chopping more of my XBALL Bronze.

Some specs on the equipement i am running:

My LPR is set to 62 PSI
I swapped a reg with a buddies and it does the same thing.
I have only shot through 8 cases of paint
I am running Cross Fire LP tank
VLocity Hopper
DYE IRONMAN Stainlesss Steel .686 back
14" DYE UL Barrell
Cobra Mamba FLY or Joy Division watever you want to call it (Angel FLY)

Why is my CHRONO reading fluctuating soo much like gas prices?

Please help and my local MT won't be free for atleast 3 weeks. I am located in Toronto so if anyone knows what they are doing and willing to help that would be awesome!
http://i16.tinypic.com/4cbesfb.jpg
http://i16.tinypic.com/2vmwqq1.jpg
Peter

[thatguy!]

You're sure it's LP, eh?

You say you swapped regs. What kind of reg was the swapped one?

Lowering your LPR to 50-55 may help, but that is definitely going to be a band aid over a knife wound.

[madgti]

My LP tank has the blue sticker around the front of the tank. Also my buddy let me use his LP crossfire tank and it did the exact same thing.

At this point we can rule out the tank cause my tank works fine on his gun.

The reg my buddy let me use is a CP. It woks fine on his gun but not on mine.

[thatguy!]

Has it always done this or did it just start?

[Gimmick]

Most likely, if you can't figure it out, or you want to try something, it'd be better to get it serviced at your local shop as the techs will know what they're doing. At my local proshop it's $15 - $35 for a complete service, clean, tune, and set of the gun, so it should be cheap. If not, call up one of WDP's techs for support, they have a line for that.

[madgti]

i never knew WDP had a line for end user to trouble shoot their guns.

I'll check up on that ...

Thanks

[madgti]

The gun shot like that for a while and the shop i got it from fixed it and now it is doing it again.

[thatguy!]

i never knew WDP had a line for end user to trouble shoot their guns.

I'll check up on that ...

Thanks
By that he means you can call the MTs.

I have no idea what the problem could be, and I know my way around the LP generation. Needs a servicing and an explanation.