Angry Board Eye Logic?

[RangerJoe]

So how does it differ from stock? i was readin that it uses dm style logic? So if your in forced shot mode (or w/e u call it) and the breech is empty it will still fire if you hold trigger for 1/2 sec? and if there is a ball in breech it will fire?
im confused....

[thatguy!]

The FBS and SSC boards have three modes: Delayed, Forced, and Test.

Delayed is meant for Reloaders (sound activated) and will fire a half second after you pull the trigger when the breech is empty. The theory is that this dry cycle will trigger the loader to feed if it lost sync with the gun. In practice, it chops the last of the unpressurized stack like a mofo.

Stock on the FBS and SSC is Forced, which will fire a clearing shot if you hold the trigger for half a second or a second or something. This is DM style operation, and I doubt the Angry uses something different.

Test is like Demo.

[RangerJoe]

so the forced one is like regular operation on a stock 5peed board- sees ball and you pull trigger and it fires?

[thatguy!]

That's how eyes work, yes... lol

Forced is not very different from the Lp4.1 Fly board I used to have. So I don't see it being a new thing to get used to for you.

[Brad7]

So how does it differ from stock? i was readin that it uses dm style logic? So if your in forced shot mode (or w/e u call it) and the breech is empty it will still fire if you hold trigger for 1/2 sec? and if there is a ball in breech it will fire?
im confused....

--From Manual


Eye Mode – Three eye modes are available:
1. Delayed – If the eye system does not detect a ball in the breech for ½ second, the marker automatically fires. This is useful for sound activated loaders because it ensures that a shot is fired, even without paint, so the loader will continue to feed.
2. Forced with force shot – The marker only fires if paint is seen in the breech or the user pulls and holds the trigger for ½ second, thereby initiating a force shot. This is the default and the same as the stock DM4, DM5, or DMC software’s eye mode.
3. Test – This mode is specifically for seeing how fast the user can fire the marker, or how fast the pneumatics can actually cycle. The eyes work to prevent firing if they are blocked. This mode is only for dry firing. The LED is used to show the fastest achieved rate of fire:

***Force Shot – In the event the eyes are enabled, the breech is empty, and the user wants to fire a clearing shot, a force shot can be initiated by pulling and holding the trigger for ½ second. This is useful with force fed loaders that sometimes push a ball slightly into the detents where the eyes are unable to see it. After force firing, the next ball will load, and operation will continue as normal.***