My LED Wont shoot...

[angel1013]

Ok the noid is clicking and air is going from the minireg to the body but the ram wont get air.
i took the frame off and air is coming out of the hole from the minireg so its not a problem with that.
and im pretty sure its not a problem with the Noid because it is clicking fine.

i think its a problem with the ram.


it is not getting enough pressure to push it into the bumper? ( the part that gets hit and makes the gun shoot.
i took an allen key and pushed the ram into it manually and it shot so im pretty sure it is just the ram.

i took the ram out and replaced it with a brand new one and oiled the o-rings and everything but still no luck.


IF somone could please help that would be great.


Somone (that knows what they are doing) call my cell to walk me through fixing my gun if that is easiest for you.


770-366-5757


thanks
blake

[Eclipse]

sounds like the LPR is set to low and not enough pressure to opperate the ram, OR the snap ring on the back it to tight and wont allow the ram to move, check the pressure of the LPR and re-adjust the snap ring and see if it fires

[armstrong]

Take off the back cover and in the middle of the ram should be the snap ring aka (brass screw) back it out a little at a time, hopefully it should fire.

[for2nato]

also, just because your noid is clicking doesnt meen there is not a restriction in one of the air ways that operate the ram.