problems with a1

[MAster_Dekoy]

ok so i am having a problem that seems to be pretty common. my eyes do not work. the gun says there is no ball present when there is a ball in the breech. the thing that gets me is when i unload the gun and stick my finger in the breech, the eyes test good. after that, i put my loader on(a vlocity) and the gun will not fire, the gun detects an eye malfunction or whatever. i checked all pressures, all settings are joy/rages, and a fresh battery.

oh and i think i have a bad noid or board, cause the gun will not fire anymore. its not the trigger activation point or anything, cause i can still turn the eyes on/off. it started by skipping shots with the eyes off, then went to straight up not shooting. also, most of the time(it will every once in a while for 20-30 shots), the noid does not click when there is no air in the gun.

i have only had this gun for about a month, less than 2 cases through it(cause it never works). plz someone help me resolve these issues.

[Talon]

Sounds like dirty, faulty, or disconnected eyes and a trigger point activation problem to me.

Call an MT and they'll get you sorted out.

[KEN CRANE]

ok so i am having a problem that seems to be pretty common. my eyes do not work. the gun says there is no ball present when there is a ball in the breech. the thing that gets me is when i unload the gun and stick my finger in the breech, the eyes test good. after that, i put my loader on(a vlocity) and the gun will not fire, the gun detects an eye malfunction or whatever. i checked all pressures, all settings are joy/rages, and a fresh battery.

oh and i think i have a bad noid or board, cause the gun will not fire anymore. its not the trigger activation point or anything, cause i can still turn the eyes on/off. it started by skipping shots with the eyes off, then went to straight up not shooting. also, most of the time(it will every once in a while for 20-30 shots), the noid does not click when there is no air in the gun.

i have only had this gun for about a month, less than 2 cases through it(cause it never works). plz someone help me resolve these issues.

please change the battery,make sure you have atleast 1.8 software version and raise the dwell to 8. also remove the exhaust stem and inspect it. please advise asap.

[Valas]

My issue sounds very similar. http://www.angelowners.com/showthread.php?t=62772 I'm running 2.1 with fresh batteries. Exhaust valve looks fine and is the updated version. Valve dwell has been 6.5 and 7.

[MAster_Dekoy]

i am running 2.1 with fresh batterys. the exaust valve is fine, seals correctly, the spring is not stiff/sticking. i tried the dwell at 8 and it would fire every once in a while. the eyes still would not work. also, when it worked, i noticed crazy drop off but it was not consistant. it would shoot a couple of shots fineand then one would not shoot out the barrel, then back to shooting fine. when shooting correctly, it would be +/- 8 or 9

[MAster_Dekoy]

did i stump everyone???? lol

[MAster_Dekoy]

anyone? really want help with this.... i can't afford a $1000 paperweight.

[MAster_Dekoy]

ok does anyone have any ideas or should i just throw this thing in the trash?

[BustA]

Try a different loader, I almost certain its an issue with your loader. If the problem persists, send it to an MT. but if you decide to throw it in the trash, just send it to me; i will take it.