PDA

View Full Version : Have 2.1 still won't hard ramp


Wickedways
12-01-2006, 02:49 PM
Ok guys I have installed the 2.1 software that was supposed to fix the hard ramp issue. Well it still does not work. I have tried EVERY tip that has been posted on here. Now can someone please tell me what the problem is here?

Also this Saturday I had devloped really bad FSDO and random Eye errors, (Balls shown on display with line through them) reflashed it back to 1.9 and no when used Sunday I had no FSDO and no eye errors while useing the same case of paint.

Brad7
12-01-2006, 03:32 PM
What is your kick in kick out set to?

Wickedways
12-01-2006, 05:48 PM
same as my soft ramp which works fine

start delay 4
Kick in 5
drop out 4

odditysmurf
12-01-2006, 08:18 PM
I just loaded 2.1 and have now my ramp doesn't work, soft or hard. Soft ramp worked with 1.8. May try reflashing to 1.8 and see if i get soft back.

Wickedways
12-01-2006, 08:46 PM
my soft always worked but hard never did

mmmmmSteak
12-01-2006, 11:37 PM
I dont know about my soft/hard ramp, but earlier this evening i was ripping a few pods through my A1 and i tried it on psp, and millennium ramping and they worked wonderfully and i have 2.1,...

Wickedways
12-05-2006, 01:27 AM
Anyone have any ideas yet? MT's are you around to help here?

Epoophoron
12-05-2006, 05:13 AM
neither hard, soft ramp nor psp, millenium, etc are working with my A1 v2.1
damn !

xxmjumpman23xx
12-05-2006, 05:19 AM
damn... WDP needs to fix these mode issues, their have been problems since when the A1 came out

demiruyar
12-05-2006, 05:32 AM
For the ones who are experiencing problems with the custom modes:
Please set your kick in higher than your drop out.
for example
kick in:7
drop out:2

Wickedways
12-05-2006, 10:15 AM
For the ones who are experiencing problems with the custom modes:
Please set your kick in higher than your drop out.
for example
kick in:7
drop out:2


Been there done that on both settings once again soft works Hard does not.

Epoophoron
12-05-2006, 10:44 AM
none works - embarrassing

BoB
12-07-2006, 07:35 PM
neither hard, soft ramp nor psp, millenium, etc are working with my A1 v2.1
damn !

Are you shooting paint? What are your settings?

Wickedways
12-11-2006, 08:56 PM
have had to switch back 1.9 to solve a new random eye error and bad FSDO. Still will not hard ramp.

AirAttack
01-09-2007, 09:15 AM
I'm new to the A1, just got it yesterday and I loaded 2.1. Is it true that unless one is actually shooting paint the A1 will not initiate ramp whether dry firing or working the trigger while the marker is de-gassed?

hookem
01-09-2007, 09:33 AM
I haven't owned an angel that ramped without eyes with the stock board