PDA

View Full Version : Malfunctioning speed '05

thejetman63
12-01-2006, 12:42 AM
Hey everybody,

I have and angel speed '05 that won't fire. I believe that it is a software issue and my lack of any knowledge of the software is not helping too much.

When I turn it on all of the lights come on then move down one by one like always.

Then the big one at the top and the one below it turn red and the very bottom one is green. When the trigger is pulled nothing happens.

Attempting to turn off the angel eyes by holding the trigger also is no help.

Please help.

Thanks
budda
12-01-2006, 02:21 PM
Call a MT.
Brad7
12-01-2006, 03:40 PM
What software version do you have?
fixit
12-01-2006, 07:42 PM
There's a button under the left grip. Bottom of the board. Turn the gun on with the grip off & push it . That will reset your gun to the default settings. You may have to push it twice. I would try that before you send your gun off or call a tech.
budda
12-02-2006, 07:36 AM
I have Version 7
fixit
12-02-2006, 07:39 AM
did you try the reset button? new battrey?
boostmonkey
12-02-2006, 07:46 AM
Are you sure the trigger movement is set correctly to activate the trigger? Set the vernier wheels for maximum trigger movement to check.
fixit
12-02-2006, 08:10 AM
good point boost, its been a while since I owned a speed
thejetman63
12-04-2006, 10:08 PM
Hey Boost,

Thanks a lot that did the trick. It looks like the trigger wasn't going all the way back. I moved the wheels and it seems to be working thanks.
boostmonkey
12-05-2006, 10:30 AM
Hey Boost,

Thanks a lot that did the trick. It looks like the trigger wasn't going all the way back. I moved the wheels and it seems to be working thanks.

No problem. :smile: Glad you got it fixed.