crownsk8er
11-29-2006, 10:09 PM
ythis is the responcse to the first email i sent
>Here are the answers to your questions:
>
>
>
>hey man i have some q's about the pulse loader for ya real quick.
>
>* i have an a1. is the rf chip compadible with this gun? The RF chip is not
compatible with the A1 unless you put an aftermarket board in it. The stock A1
board interferes with the transmitter.
>
>* where do i get the rf chip installed? The RF chips can be installed at any
PSP, NPPL or Millennium event. Also Procaps Direct will have certified
technicians in each of the 6 warehouses across the country. Tech classes for our
dealers will be happening very soon.
>
>* where do i get the rf chip? Any Procaps Direct dealer that carries our
products will be able to stock them.
>
>* can i buy the loader then get the rf chip instal at a later date. Yes, the
Pulse runs in two modes; RF mode and Pulse mode. The pulse mode does not require
the RF transmitter.
>
>* how much does the rf chip and instal cost? The RF transmitter costs $35 and
installation is free at events. I do not know how much dealers will charge for
installation, probably regular shop labor rates.
>
>that pretty much covers it man. im just wantin to make sure what my options
are since the a1 dont have intelifeed. also does it come with instructyions on
how to instal it. and if youn dont know the answers to this can you put me in
contact with someone that does?
this is the response and email i sent for the sencond
email
he. i have another q. why is it that it screws wqith the wdp software? cause wdp
dont have the inteli system on the a1. soeven the soldering to the noid tabs
dont work? will it fry my board if i try? have yall tested it on it? what if you
solder it higher up to the noid wires going to the noid? like does the impulses
from the board screw up the transmitter? just curious here cause i really want
this and i will make it work. . but you have done testing on the a1?
responce
The A1 with a stock board will NOT WORK. If you try to install it, it will VOID
your warranty. WDP is working with us and are developing something that will
work. I do not have a timeline on when they will have the solution for this
problem. As of right now the only way to make the RF transmitter work with an A1
is to get an aftermarket board. Tadao and Angry make boards that work for your
situation.
now i have the most recent.
John,
As stated in an earlier e-mail, the stock board of an A1 will not work. It
interferes with the transmitter. Where you attach the transmitter does not
matter... the board sends out its own pulse that interferes with our
transmitter. The only option for you right now is an aftermarket board to
eliminate the interference.
DXS Pulse Tech
personally i think its utter bull§§§§. thats why mine wqill be here on saturday. or monday at the latest. and then i will make it work. cause i want it. now.
>Here are the answers to your questions:
>
>
>
>hey man i have some q's about the pulse loader for ya real quick.
>
>* i have an a1. is the rf chip compadible with this gun? The RF chip is not
compatible with the A1 unless you put an aftermarket board in it. The stock A1
board interferes with the transmitter.
>
>* where do i get the rf chip installed? The RF chips can be installed at any
PSP, NPPL or Millennium event. Also Procaps Direct will have certified
technicians in each of the 6 warehouses across the country. Tech classes for our
dealers will be happening very soon.
>
>* where do i get the rf chip? Any Procaps Direct dealer that carries our
products will be able to stock them.
>
>* can i buy the loader then get the rf chip instal at a later date. Yes, the
Pulse runs in two modes; RF mode and Pulse mode. The pulse mode does not require
the RF transmitter.
>
>* how much does the rf chip and instal cost? The RF transmitter costs $35 and
installation is free at events. I do not know how much dealers will charge for
installation, probably regular shop labor rates.
>
>that pretty much covers it man. im just wantin to make sure what my options
are since the a1 dont have intelifeed. also does it come with instructyions on
how to instal it. and if youn dont know the answers to this can you put me in
contact with someone that does?
this is the response and email i sent for the sencond
he. i have another q. why is it that it screws wqith the wdp software? cause wdp
dont have the inteli system on the a1. soeven the soldering to the noid tabs
dont work? will it fry my board if i try? have yall tested it on it? what if you
solder it higher up to the noid wires going to the noid? like does the impulses
from the board screw up the transmitter? just curious here cause i really want
this and i will make it work. . but you have done testing on the a1?
responce
The A1 with a stock board will NOT WORK. If you try to install it, it will VOID
your warranty. WDP is working with us and are developing something that will
work. I do not have a timeline on when they will have the solution for this
problem. As of right now the only way to make the RF transmitter work with an A1
is to get an aftermarket board. Tadao and Angry make boards that work for your
situation.
now i have the most recent.
John,
As stated in an earlier e-mail, the stock board of an A1 will not work. It
interferes with the transmitter. Where you attach the transmitter does not
matter... the board sends out its own pulse that interferes with our
transmitter. The only option for you right now is an aftermarket board to
eliminate the interference.
DXS Pulse Tech
personally i think its utter bull§§§§. thats why mine wqill be here on saturday. or monday at the latest. and then i will make it work. cause i want it. now.