a little help

[haroldenzo]

I posted a couple weeks ago saying my A1 was not using the right amount of air and that the balls were just dropping out of the barrel. I've tried everything and even ordered a lpr pressure guage and adjusted the pressure down to about 58 or 59 psi. Now I alos have a small leak coming from the front around the eye cover and exhaust cap. Need to figure out how to fix this issue with the air on my a1 and how to fix the leak.

[BoB]

You have had the gun for nearly 4 months, I recommend taking her into the Miami Warranty Center and have them go though it and fix it right. If you have tested/set all of your pressures then it is something else.

[haroldenzo]

I have only tested the pressure for the lpr, i don't have the other guage. figured i'd get that later. Suppose i'll just have to send my gun in to miami

[haroldenzo]

any idea at all what could be the problem? I have no idea myself

[haroldenzo]

hey all. I just got the exhaust valve pressure tool and adjusted it to 270psi. So now the exhaust is at 270 and my lpr is at 57 or 58. Now at first I was still having the same problem until I turned up the dwell to 9.0. When i did this i got a leak from the exhaust valve so I turned the dwell back down and now paintballs are shooting a little farther. Unfortunately, i only have about 150 psi left in my tank so I can't run any more tests but does anyone know what I possible need to do to completely fix this. I think i'm pretty close