Loose Ram

[Demon_Angel]

I just picked up my angel, and i heard a loose sound comming from the breach. i opened it (had to push the bolt back because now the breach lever wont activate the bolt) and saw my ram slid all the way forward, and was able to slide back as i tilted the gun up.

PLEASE HELP ME!! i need to get this fixed as soon as possible, and dont have the cash to send to an MT (as much as i would LOVE to do so i just cant afford it )

can SOMEONE (preferably a tec) walk me through what i need to get done to fix this!!

Thanks

[thatguy!]

And you posted it here why?

Probably missing the o-ring at the base of the hammer that acts as the snap ring. What happens when it's aired up?

[Mavrick]

Moved it to G7 area. If it is in the wrong place let us know.

BTW advice given is most likely the problem.

[warpedx]

When the marker is degassed, the ram will not move all the way back on it's own. The lever can push it forward, but it won't pull it back. Make sure that the ram is all the way back to the point where the snap ring is engaged.
As stated, it is the oring on the shaft right next to the hammer.