PDA

View Full Version : Minireg Leak

R3MY
11-09-2006, 02:58 PM
I have a small leak coming out of the notch at the top of my mini reg. I've taken it off and inspected the 'boot'-ring and relubed it. Everything looked ok... anyone have ne suggestions?
RickA4
11-09-2006, 07:58 PM
If youhave a spare "boot ring" replace it to see if that solves the problem, Also check the Orings on the min-reg. see if that helps. peace if it works then do a Rail on me!
SPECIALNEEDS
11-09-2006, 08:02 PM
i had the same problem i just turned on my gun then my air then turned off the eyes and fired a shot
it did it like 3 more times after i turned off the air then it never did it again
RickA4
11-09-2006, 08:23 PM
it probably took a few shots to seat the oring properly. great!
R3MY
11-09-2006, 09:07 PM
I've replaced the oring on the LPR piston, messed with the lpr, relubed the orings on the lpr, adjusted the mini-reg... nuthen helps. even after shootin a few shots it still leaks..
SPECIALNEEDS
11-09-2006, 09:15 PM
did you check the gauge (if you have one their)
R3MY
11-09-2006, 09:23 PM
no.. i just took out a shim, then another shim.. and that didnt fix it so I put them back
SPECIALNEEDS
11-09-2006, 09:34 PM
right

http://i22.photobucket.com/albums/b331/fork3961/leaking.jpg
R3MY
11-09-2006, 10:01 PM
right

http://i22.photobucket.com/albums/b331/fork3961/leaking.jpg

yea, I fixed it. one of the orings on the inside of the lpr. I put a couple drops of love juice in the lpr re-installed it and it seems to have fixed the leak.

Thanks for all the help guys!
SPECIALNEEDS
11-09-2006, 10:03 PM
no problem