Need a bit of Techies Help, please

[Dark Warrior]

Fit Board
Switch on
The light goes through colour sequence then halts at constant green.
The eyes are off (lazer eyes)
Nothing works after that.
The eyes work fine with standard board.

Anyone help

[thatguy!]

That is programming mode, and it goes int othat mode if the trigger is held down while the gun is turned on.

Back the trigger off the switch so it can reset properly.

[Dark Warrior]

That is programming mode, and it goes int othat mode if the trigger is held down while the gun is turned on.

Back the trigger off the switch so it can reset properly.

Sorry "TG" forgot to say trigger switch is fully free to move
Light stays green whether switch open or closed
Held button for 20 secs turned off turned on then i get same again

[thatguy!]

Where'd you get it?

[Trigga Nometry]

Is this the first time you are using it? Does the trigger leaf touch the microswitch the right way? You can feel and hear the microswitch click when you pull the trigger?

http://img.photobucket.com/albums/v154/TriggaNometry/Tadao/100_1222.jpg

It sounds like the microswitch might be held back by the trigger. Either that or the microswitch is dead or damaged.

[thatguy!]

You still have the green Tadao, trigga?

[Trigga Nometry]

Nope, had to give the prototype back to Ken a while ago and bought the production version (white one). That pic is old.

[Dark Warrior]

Is this the first time you are using it? Does the trigger leaf touch the microswitch the right way? You can feel and hear the microswitch click when you pull the trigger?

http://img.photobucket.com/albums/v154/TriggaNometry/Tadao/100_1222.jpg

It sounds like the microswitch might be held back by the trigger. Either that or the microswitch is dead or damaged.

the trigger is not contacting the switch in any way at all

Can these be repaired if I return it to the US, but need really to know if it is faulty

[thatguy!]

Sounds like the switch is bad.

[Dark Warrior]

best contact them about a repair then - cheers