What do you need to fine tune your Baby?

[RickA4]

Help me out with some advice. Looking for the proper way to tune my G7.

05 G7 Tadao with a MT valve / Std LPR / soft face bolt.

Got a Boostmonkey gauge. and a Xstream tank. what else do i need to tune up the gun?

Chrono / paint and air. what settings am I looking for?

450psi on the tank no lower, right?
what dwell setting? what lpr setting? Dryfire to tune, then use paint?

any advice would help out. Thanks Guys!! Rick

[Mavrick]

Rick, check out the forums on Tadao settings. Lot of info shared on this topic. Otherwise looks like you got all of the necessities. Fine gun you got and your going to be getting many hours of play with proper maintenance.

[RickA4]

Thanks Mav,

I wanted to know how the Minireg is set to a certain psi.. I've read a bunch of forums saying that it's needs to be set, but how to set it is always left out.

[Mavrick]

Do a search for a gauge set that Trigga did. One is for low side the other for high side. You will need a piece of macro line for the exaust valve side. This will allow you to use the Angel gauge male adapter. You will need to use 2 different pressure gauges though so that you get accurate psi readings. He set up his with quick change fittings. I did the same and works like a charm.

[RickA4]

I've seen the set up, i get putting a macro line over the stem and using a low 0-400 psi on the left side facing the gun. but adjusting it how, turning what? the velocity adjustment?

[Mavrick]

yup