Mini Reg

[dbjking]

Okay, I was chronoing my marker, when a loug bang went off, my macro line blew off of the Mini reg, but stayed in tact with the drop forward. So I was wondering how do you get that silver thing off the mini reg, because mine's leaking, I tried to put it back together, but it diddn't work. So how do you take it off to put a new macro line kit on?

[Eclipse]

the end cap there is a 11mm allen key INSIDE the cap (reg side) and then u have to take a 4mm allen key ( i believe) and unscrew it, it might be locktited so u may need some elbow grease

[dbjking]

Thanks, but how do you put the macro line in, I know this sounds retarded, but every one has to do this at some point right?

[dbjking]

okay, that was easy, but now I have a little problem. this has been going on since I bought it, but it was a really small leak, and it stopped after a few rounds. but now it's constant but it is a small but still noticable leak, so now I have to fill up every half hour. please help me stop the leak.

pic here (http://i62.photobucket.com/albums/h119/dbjpics/Markers/leak.jpg)

Thanks

[Mavrick]

That is from the O ring seal. To get that apart 2 screws need to be taken out. Unscrew the Mini reg, look into the tube and you will see an Allen cap head screw. Remove it and then remove the one between the trigger guard and the ASA shoe. When it comes apart you will see the O ring. Clean all of the contact surfaces of the O ring. If you have a spare one replace it and regrease, reassemble making sure the O ring stays in place in the reverse order that you took it apart. That should do it. Myself and I'm sure others have reassembled and pinched the O ring so the seal was not right.

Look at your manual or download the manual from this web site to see in detail what I just said.

[dbjking]

So, uhh where can I find this Manual, cuz I have a spare o-ring and it keeps doing the same thing. It isn't pinched or anything, but it just leaks.

[Mavrick]

Try this link

Angel A4 Manual (link here) (http://www.wdp.tv/manuals/index.htm?a4_manual/a4entry.htm)

Download the .pdf file link on that page.

[dbjking]

THANKS ALOT MAV.

It wasn't "the" o-ring, but was a o-ring. There was a chunk tore out of the LPR's system, I had a spare, and replaced it. Silent as a kitten, if kittens were silent.