PDA

View Full Version : <><><<---> ANGEL SETTINGS QUESTIONS!!!!!!!!! plz plz plz HELP!!!!!!!!!

AAXplosionnn
10-06-2006, 09:32 PM
guys, WHAT is ABS??!?!?1 i have no idea and cannot interpret what it says in the manual!!

plz help

o yeh and sometimes when i put in my tank it goes crazy and loses all of the air and i feel air coming out of the regulator, my hose is loose, i keep turning the little bolt both ways it won't tighten

HELP!!!!!!
Eclipse
10-06-2006, 09:48 PM
I dont know about the last bit but ABS is anti bolt stick kinda like matrixs have....it just prevents 1st shot drop off
Trigga Nometry
10-06-2006, 10:05 PM
It is the Anti-Bolt-Stick. It does help with potential first shot drop off. Say your gun has been sitting around a while, with the ABS, it'll raise your dwell for the first shot to work through and o-rings that may be stuck and get them working again.
AAXplosionnn
10-06-2006, 10:15 PM
wut should i set it on, the ABS
Trigga Nometry
10-06-2006, 10:39 PM
Most people have great results with these settings:
http://img.photobucket.com/albums/v154/TriggaNometry/Angel%201/PROSETTINGS.jpg
Eclipse
10-07-2006, 01:33 AM
It is the Anti-Bolt-Stick. It does help with potential first shot drop off. Say your gun has been sitting around a while, with the ABS, it'll raise your dwell for the first shot to work through and o-rings that may be stuck and get them working again.

thats what I said but less techincal :smile:
AAXplosionnn
10-07-2006, 09:41 AM
sweet i think im gonna put in on the lowest, .25

is it bad to have it that low?

thanks 4 the help guys
Brad7
10-07-2006, 09:44 AM
It's not bad to have it low. I was told by a MT that since the Angels don't have static o-rings to set my ABS to 0 but .25 is fine.
AAXplosionnn
10-07-2006, 09:46 AM
awesome tks
DarthAlan
10-11-2006, 01:00 AM
Higher ABS could possibly cause dangerously high FPS shots, and could loose you a game if a ref checks you during a game. That is, if you haven't shot in a while.
BAKERmancan
10-11-2006, 08:46 PM
Now why is it that the angel 1 needs an ABS setting when no other angels did ?

I can leave my G7 around for a couple hours and pic it up and it shoots fine on the 1st shot.
Brad7
10-11-2006, 09:40 PM
I think that the designers just put that setting on there just because almost all aftermarket boards have that feature, and since WDP wanted the Angel One (board) to have almost every feature, they included it. That's just my opinion, but it makes sense.
BAKERmancan
10-12-2006, 04:48 PM
That seems to be the most likely reason since the whole image of the ONE is that it's the best stock and doesn't need upgrades.
Jeroensplash
10-23-2006, 08:45 PM
Hello Trigga,
I assume that the mode used here is NPPL.
In that case its really up to fingerspeed to make it fly ?

Jeroen
mike and ikes
10-25-2006, 02:22 PM
Hello Trigga,
I assume that the mode used here is NPPL.
In that case its really up to fingerspeed to make it fly ?

Jeroen

Correct. The angel one is setup to be tournament legal.
mike and ikes
10-25-2006, 02:24 PM
I think that the designers just put that setting on there just because almost all aftermarket boards have that feature, and since WDP wanted the Angel One (board) to have almost every feature, they included it. That's just my opinion, but it makes sense.

I also got that info from WDP at the tech class. They don't feel like the ABS feature does anything to help the Angel One. It doesn't need it but the feature was not hard to put in. Keeps whiners happy!