Grease

[Bleda]

Its getting about time to Grease my A1 and unfortunately I dont have any Angel grease nor time to order angel grease before my tournament on Saturday so I was wondering what would the recommended alternative be? Dow33, Shocker Grease, neither?

[RangerJoe]

i would say so its fine..iv used SP's sleek(dow 33 or 55 i believe) and hanvt had a problem

[bigwilly01]

I have another question. When should I grease my gun? How many shots, ect.?

[caples69]

Suppose to grease it every 20,000 shots from what I was told, and lube it every 8,000 shots.

[Poodiddy]

Frazer told me to lube every 2000 shots by placing 2 or 3 drops of love juice in the ASA and dryfiring it a dozen times or so. I grease my RAM with Shocktech's Gun Butter (aka Slick Honey) every 8000 shots. I havent had any problems with my gun and it performs like a charm.

[caples69]

Yeah you are right, I got my numbers mixed up there...I beleive thats what it states in the manual as well.

[BoB]

I would ask Frazer again.

[cyber_havic]

Please correct me if I am wrong Bob. I was told that you only have to lube it every 8,000 shots and greese it ever 20,000 shots, for lubing you should only have to put a drop or two into the mine reg micro fitting line, and when it comes to lub you should only have to do that about every 20,000 shots and that only consists of putting grease on to the seals and o-rings. and just keeping the bolt wiped down and clean. Nothing else should have to be lubed, everything that needs to be lubed gets lubed from the drop in the micro line fitting. Will some let me know if that is the correct procedure.

[BoB]

Page 19 of the manual is correct. These numbers can be slightly less depending on the playing enviroment i.e. sand storm etc...

[bigwilly01]

Thank you Bob, You just made me feel like an ass for asking when I need to lube. I guess I need to take a closer look at my manual. I did not think to really read those margine notes. Thanks again.

[Pericles]

So basically no love jiuce needs to go anywhere other than the ASA to lube the internals? and then lube the O-rings with dow-33 or anyother lube? Im I correct?

[RangerJoe]

yep