Love Juice question?

[NikPetro]

I was reading the manual and it says to use love juice oil on a cloth to lube the ram and lpr and all that... Is this tru or do i use grease for those and the love juice is just ment to squirt down the macroline???

[jay-lee]

squirt love juice down the macroline... you arent serious are you???

[Shooters~SOBA]

you only should do that if the marker is brand new or if it hasent been lubed in a long while.

[BustA]

yeah you only need to lube the ram every 10,000 shots or so. you put a few drops of oil in the asa around every 2,000 shots.

[Trigga Nometry]

Generally, the grease is for the o-rings ansd the oil is really for the moving parts. Most oil around 8,000 shots or so and grease 10-12,000 or so.

Yes, some people do put the Love Juice in the macro line, dry fire to let it cycle thru the gun and they are good to go. Some people say that doing it this way can have the potential of gunking up your minireg. That is why I like to put the oil behind the LPR and valve caps (in the cause of the A1 just in that area behunbd the cap that covers the front end of the A1). Then dry fire, remove the bolt and wipe it down (you want NO OIL on the bolt) because some oil can get on there when you first oil and dry fire.

The key is to not to use a lot or oil or grease. One or maybe two drops of oil is really all that is needed to do the job. And a dab of grease on each o-ring (a very thin coat).

[jay-lee]

hmmm... did not know that.. thats why I was kinda like whhhhaaaaaa??? :wall: