G-Supreme
09-06-2006, 12:25 PM
Hi my marker was working perfectly until suddently when I turned my on/off on the marker started to leak from the inside under the solenoid. I checked my lpr setting to see if the pressure was too high but it was exactly at 60 psi. I took apart the lpr, ram and solenoid. All the lpr orings were fine. I changed all the outer ram orings (they were fine but I changed them any way) and the solenoid shaft orings also looked good and so did the solenoid bottom seal. Can anybody help me? Could it be the inner ram oring that is damaged if so how can I take the ram apart?