Intellifeed Question

[metal_dragon35]

ok im about to buy a 05 speed and was wondering if i have to have tadao or if i can use the stock board. how much it is to get installed. and if i got it instaled in a stock halo and i got a new board for it later if it posibal to put the new board in and still have intellifeed? thanks

[Trigga Nometry]

For the Speed 05, you will need the Tadao to run Intellifeed.

The MT Intellifeed goes for $50 for the kit and another $35 or so if you need it installed.

[Mavrick]

ok im about to buy a 05 speed and was wondering if i have to have tadao or if i can use the stock board. how much it is to get installed. and if i got it instaled in a stock halo and i got a new board for it later if it posibal to put the new board in and still have intellifeed? thanks


The intellifeed will run on any Halo loader. The boards can be from the stock and any upgrade board you choose to use. Angry or Cheetah boards are also supported. I tested every board that a Halo can use.

For the Marker board. Any stock WDP board that has the "Hop" connector on it. Aftermarket boards are Tadao board as well.

If you do a search on AOG you will find all the documentation for installs and others have posted settings for optimization of the setup.

Feedback from users has been highly positive! Everyone that has had it done loves it.

[metal_dragon35]

ok but if i get it installed in a stock halo and later switch boards is it esay to reconnect it?

[GMG Force Fly]

ok but if i get it installed in a stock halo and later switch boards is it esay to reconnect it?

You wont need to disconnect it. All you will have to do is pull the power and eye wire off the stock board and plug them on your new board and your done.

[metal_dragon35]

o ok thanks im definatly geting this done once i get my angel and tadao

[metal_dragon35]

and its only 85$ to get it installed?

[Mavrick]

What Angel are you modding? A4 flys have the hole already. Newer guns do not.

[metal_dragon35]

05 speed

[Mavrick]

OK, need to contact an MT then. Bob is your best bet. He will need to put a hole in the solenoid cover for the connector to mount to. Then he will add in the other stuff, new intellifeed board, and Halo wiring and your good to go. He will give you pricing and any other information along with the amount of time that is needed to get the job done and shipped back to you.
While he has it you might want to have a service tuneup done so you know your in rocking shape to rip strings when you get it back!

[metal_dragon35]

.
While he has it you might want to have a service tuneup done so you know your in rocking shape to rip strings when you get it back!
how much is that?

[Mavrick]

I think Trigger's figures above are accurate. Best bet is to email Bob at Fix my Angel for the amount. When you contact him please state the type of marker you are sending, type of marker board you have or want to purchase. The loader board you have. (only Halo's are supported presently) That should do it. Then, like I said any other work you want done while it is there. I am pretty sure the service forms you fill out to get a shipping number will allow you to add all this info so he will accurately quote the price for services he will preform. That way there are no surprises! Let us know how it goes when its all done. We love to hear great news!

[metal_dragon35]

1 more Q i know u said it before but i have to ask agin just to b shure i HAVE to have tadao with an 05 speed to get it intelli'd?and it wont work on the stock board?

ok ill post as soon as i get it done, actuly ill post as soon as i get the gun and the progress of geting it intelli'd

thanks for all your help

[Mavrick]

It works with Stock or Tadao boards in the marker. If you upgrade to Tadao later it will still work, just need to plug the wire connector into the place provided on the Intellifeed board.

[metal_dragon35]

ok thanks

[metal_dragon35]

can you intellifeed the pred board

[thatguy!]

Nope.

[metal_dragon35]

Damn