angel lcd 2000 ad bronze hellp anyone plzzz

[paintball823823]

my ad dosnt shoot at all everythings on and gassed up yet nothing it stil clicks wen i pull the trigger but wont fire its soooo weird any1 know wut up???

:notsure: :notsure: :puzzled: :puzzled:

[Eclipse363]

if it clicks when you pull the triger it could be a bad ram or solenoid. try using the button on the top of the solenoid and see if that works. Just remove the sight rail and press the orange button with a pencil or something, make sure the marker is gassed up. It should fire one shot. If it doesnt you have a problem with either the noid or the ram. If it does fire its an electrical problem, most likly the wire to the solenoid is lose and needs to be plugged in again.

[bigfootimp]

I would recommend checking your 14-way gasket. Make sure it isn't in backwards.

[paintball823823]

wuts a gasket?

[chris71383]

follow what Eclipse363 said. And unless you've had the solenoid out of the gun since it was last working the gasket is installed correctly.