2k3 trigger adjustmant

[angel2k3boy]

how do you adjust the trigger for the 2k3? mine has 2 clicks when I pull the trigger and only the first one (click) makes the gun fire. how do I make the pull much lighter?

[WarpedKid02]

1. Remove left side grip (LCD Display side). Unplug the 14-way, and Battery wires (makes it easier, and so you won't rip the plugs out of the board)

2. Unscrew the two screws that hold the trigger frame. (Spring under here, and valve guide pin-*do not lose)

3. The top screw on the trigger is the over-travel screw. There is another screw under the spring, the return-travel screw.

The over-travel screw is what stops the trigger after it has fired. You can adjust this so that it will stop directly after the gun fire's. The return-travel screw stops the trigger from going forward. This screw also makes how long the pull is before it hits the microswitch.

[angel2k3boy]

yah but it has I kinda stiff click which makes the gun shoot and 1l?just sound click , Is this normal?

[angel2k3boy]

and sopmtin else, my mores dont all work as in when I open my grip, the 2 internal buttons I use to change mode right? so I click the left one to go to mode and then I click the right one to change the mode and my angel wont change the mode, it's at B and wont change

[WarpedKid02]

Without air running through, you are just going to hear a click when in -LIVE-.

Hate to break it to you, but the modes are locked.

[wdp child]

You can un-lock them with a data link

[ffry]

uh my 2k3 came with the modes unlocked ????

[angel2k3boy]

what country did u buy it in?

[MorpheusX]

does your trigger click (liek hear the microswitch click) then you pull it further and then you hear the 14 way click?
if so this is a bad microswitch and the only way to fix this is replace the baord.

[angel2k3boy]

that's ok I dont have the money now, but I think I fixed it... I ajusted the play in the pull and now it has 1 click when the marker is off, and that click is the click that makes the gun fire

[coreyguy1]

is the 2k3 trigger different then any other lcd trigger?