speed questions

[SniperSlayer]

i noticed some regs have a macro elbow but mine among others has a macro nipple with no sides it looks like theres no way to remove it with wrenches is that so?

i'd like to put an elbow on there, to do so would i have to get a newer forgrip? or is there a trick to removeing that.

also whats the best wya to adjust the breech door retaining screws, my breech seems to have some resistance on the front or rear end when i adjust them and i was doing this because when the bolt is in the breech the pin on the bolt has resistance on the hammer i assume, like its not aligned just right.

i ahven't aired up my tank to shoot this gun yet so i figured the problem might go away if the pressure is put back on the cycle the hammer to a specific position

[Magnum PI]

The resistance on the pin is normal and needed. This is the adjustment of the Ram not the breach. DO NOT MESS WITH THOSE SCREWS. They will screw you. The breach is meant to stay put. The Ram is what puts the resistance on the bolt pin, and you want some. Check the manual and AOG for adjusting the Ram....Magnum

[Bigal1]

read this:

http://www.angelowners.com/showthread.php?t=37442

[SniperSlayer]

nothing in there tells me how to remove the macro fitting, the rest i hear is normal function, not my first angel but this is the first time ive noticed these occurances, i had an ir3