What's wrong with my gun's eyes?

[Koolborderxtrme]

Ok, within the last 2 times that I have gone paintballing, my gun's laser eyes have broken. They will start off fine, and then at one point they just stop working for some reason and it will only shoots one ball every 2 seconds, and to shoot i need to turn the eyes off. What is the deal with this? Why do they keep breaking? I've broken one pair using the stock circuit board with v7 software, and one set using my tadao board.

[warpedx]

Ever get shot in the grip? One thing with my Tadao board, it got some paint underneath the connector, and started acting very strange. A can of computer air blew all the crap out and got it working good again.

[Koolborderxtrme]

nope

[dynasty 4 life]

try useind your stock board and see if the problem continues. if not then it is the tadao. If you still have the problem then it can only be 2 things the eyes are broken (solution-buy new one) or the eye holes are blocked(solution- remove the eyes and clean the holes)

[dynasty 4 life]

as for your chopping what loader are you useing and what are you board settings and fireing mode. and are you useing good,new,round paintballs

[warpedx]

Also, make sure your eyes are properly seated in the eye holes. Mine had the eye not quite right in there, which led to chopping.

[binks]

I have a question along the same lines as this thread. My gun has done the same thing. I can turn the gun on and the eyes will work fine, but than like 2 games later the eyes will only shoot 1 ball. They won't shoot anymore until I shut them off and than the gun shoots fine. Once I shut the gun off it does the same thing again. So, I was wondering if anyone has heard of any compatibility issues with the eyes and the software? I have tried to clean the eyes and I have put them back in right. I just need some help too. Thanks