I had a new g7 fly, can anyone helpme!!!

[Pelaez]

I got a new g7 fly and I will like to know if my gun is charging, i mean when i plug in to charge it it said on the board "pwon" what does this mean,??

[JeffW]

Did you turn your gun on first.

[movingtarget]

plug the charger into the gun ( make sure the gun is turned off at this time), once the gun is pluged into the charger, turn on the gun, the gun will indicate that it is charging on the LCD display.

[Pelaez]

Yes I Do This Things. The Little Lever Y Put It Up, But The Problem Is That In The Moment I Connect It To The Car It Saids Pwon, No Mater Were I Put The Lever And No Matter Which Botton I Press

[warpedx]

Under the lever is a power switch. This needs to be turned on. If you have already done that, then your board is acting funky.

[Pelaez]

so it means that i need to open mi gun and look inside, were the lever is?

[TheDragonJedi]

I don't think we are being clear.

1) Make sure the gun is off, there should be no display on the screen.

2) Plug charger into car, the little red light on the charger should be on.

3) Plug charger into the marker. At this point you will see PWON. This is an indicator telling you to turn your marker on.

4) at this point you will pull the lever up, as if you were going to open your breech.

5) There is a toggle switch hidden by the lever, this is the switch you use to turn your gun on when you are about to play. Flip this lever to the ON position

6) Your marker might still say PWON for a few seconds, After a while you will see a different prompt on the screen that should indicate it is charging.


ALWAY's Remember that you have to turn the gun on, as if you were about to play, in order for it to charge.

[Pelaez]

I did that, but the little lever is like not hard enaught I mean, is like if the inside battery is not assambly the correct way, the little lever is weak, it doesn't stays in a point if I put it up, it doesn't stays up. What should I do, can this be a battery problem, also when i move the marker the in the part were the battery should be is like if there is moving something inside, like if the battery is moving around. Pleaese Help me

[TheDragonJedi]

I'm assuming you are talking about the little metal lever that is the battery switch. If so then you will need to access the inside by removing the larger lever that locks the bolt forward, and the top portion that holds the solenoid down, you can then remove the backplate. I wouldn't recommend you do it yourself unless you have experience taking angels apart. You also should read the manual that is stickied on the G7 Thread. the manual will show you exactly what to do. Otherwise, contact one of the MT's listed above the page for service.

[Pelaez]

oK THANK YOU for your help, I all ready fix the problem, inside the backplate there was a cable that was not connect into the the battery lever, thanks to all, without your help i wasn't capable of fixing mi angel.
THANKS