DM'ing my 04 Speed

[pbohio555]

I want to put a DM frame/board onto my 2004 speed and have some questions. First, to get the frame to fit all I have to do is drill new screw holes, right? Also, I heard that the DM4 boards will plug directly into the angel without any mods, can anyone confirm this? Any additional help would be great. Thanks

[BigEvil-AO]

For the frame, you will need to drill new holes, and one for the pin that sticks out near the front one.

As far as boards go, I put a DM5 frame on my 04 speed, and used a predator DM5 board. The noid will plug right in, but you need the rest of the harnesses. If I remember, you will need the Power (9v) which also connects to the trigger switch. You will need one of those too if you dont have one already. You would also need a DM eye harness. I used the TAG red laser eye harness.

Connecting it up is straight forward. The 2pin noid wires go right in to the board. There are only 2 other connectors like I said (Power/trigger and eyes if applicable)

The power is turned on and off via the membrane pad on the grip frame just like the DM.

:devil1:

[areufakinthefunk]

no no no no no. do not drill the frame, this looks sloppy and unproffessional. i did proffessional grade work to mine.

http://i6.photobucket.com/albums/y206/extemporaneousxl/dmangel.jpg

im DM'ing angels now for $150 + the cost of the frame and shipping (unless you already have a frame, then just ship that with the gun) and the gun must be certified that it is working when it is shipped, with a signed document, its a hefty fee but it comes out looking clean. i use the stock DM5 frame holes.

[MangoChutney]

For the frame, you will need to drill new holes, and one for the pin that sticks out near the front one.

As far as boards go, I put a DM5 frame on my 04 speed, and used a predator DM5 board. The noid will plug right in, but you need the rest of the harnesses. If I remember, you will need the Power (9v) which also connects to the trigger switch. You will need one of those too if you dont have one already. You would also need a DM eye harness. I used the TAG red laser eye harness.

Connecting it up is straight forward. The 2pin noid wires go right in to the board. There are only 2 other connectors like I said (Power/trigger and eyes if applicable)

The power is turned on and off via the membrane pad on the grip frame just like the DM.

:devil1:


yeah dont drill the frame. listen to areufakinthefunk/elliot, i did the conversion on his gun with him and it looks flawless; and everyone at the field agreed. everything matches up perfectly, and it looks as if the gun came that way. i highly reccomend the conversion, he did it to my gun and i love it.

[areufakinthefunk]

http://www.angel-owners.com/showthread.php?t=58582

theres the link to my DM'ing thread. ill have more pictures up by tonight.