tadao trigger issues

[budda]

Does any one have any issues with the CP trigger and the Tadao not working properly. I have seen a few posts on PB Nation saying they have to use the stock trigger with the board, because the CP doesnt touch the micro switch correctly, because it cannot be adjusted.
Is this true?

Post pics and info please.

[Trigga Nometry]

I would recommend that you take a good pic of the board with the CP trigger installed and also a pic of the board with the trigger held back so that the MT's can see how much adjusting is needed of the microswitch. From there, I bet they will be able to determine if it is able to be moved enough to use the CP trigger with the Tadao.

If you can try and take a real nice pic like the one seen here: http://www.angel-owners.com/attachment.php?attachmentid=39923&d=1140141174

[warpedx]

I worked on a cp trigger and tadao board, the cp trigger leaf was originally too long where it would go over the top of the leaf on the microswitch. I cut the leaf a little shorter, and it worked perfectly. Just don't cut too much, it's kind of a one way operation. This was on the one that fits a 90 frame.