WDP has some weird pressures

[boostmonkey]

From the Angel One manual regarding LPR adjustment:

"The pressure needs to be at approximately 65psi
(4.5bar) output from an input pressure of 350psi
from the second stage regulator."

It's just like the manuals for all the other guns. 350psi from the minireg?! What are they talking about? With the LPR at 65 psi I run my Fly at 210psi out of the minireg. The manual recommend 82psi LPR at 350psi from the minireg on the fly. Maybe the field velocity limits are 400fps in England. Maybe someone at WDP can't convert from kPa or bar or kg/cm^2 or some crazy metric unit to psi. The excuse "they must have meant without a volumizer installed" clearly won't work this time.

[smasher41]

if i remember right, these pressure we used as a guidline to set the regulators properly. when you go to chrono the gun it will more than likely be hot. But as you lower the inline pressure the LPR pressure will drop also.

basically its so people dont set their lpr to 50 with an inline pressure of 100 or somthing and bitch that the gun doesnt work anymore.

[Eclipse]

ya its just a guideline but when u said drop the inline the LPR will drop....but im runnin 500PSI outta my scion, to a mini reg where the adjustment screw is sittin half way (not sure on PSI output though) and the LPR set at 82psi and my thing shoots ropes and even if the im outta paint in the halo and the paint drops freely in place the way its running the damn bolt bounces off of the paint :D which for a HP gun is KILLER! :D