Vernier wheel(s)??

[Raven99]

hi,

I've a G7 Fly... the manual says that it has 2 vernier wheels... but my G7 Fly only has 1 vernier wheel!!! Is it a bug on the manual or am I missing something?!?! This vernier is for what? over-travel or return stroke or what?

Another question, I have my gun with the following settings:

Mode 1 eyes on, mdb 6, loader speed 16, dwell 9, tr 4.
When I stop shooting, my gun still fires 2 or 3 rounds! what should I do to stop this! And what is dwell? and tr?

this noobie thanks 4 your help.
Raven99

[John Rambo]

the one wheel does both just put it where you want it then adjust the toe srew. The manual is a regular G7 manual you can see by the pics the G7 has two weels. You may need change the trigger offset it may be so sensitive that any vibrations could fire the gun. The dwell is how long the valve is open in cold weather you want change this so it is softer on the balls. The longer it is(the higher the #) the more gas is used and it makes more noise and its softer on the balls. It should be turned up in cold weather . And the TR is the bounce on the trigger the higher the number the more bounce.

I hope this helped

[SicAngelSix]

I had a similar problem with extra firing after I stopped. tr should probably be down all the way. My problem was that I had made my trigger so sensitive that even the slightest kick from the gun or bounce would make it fire. DEVS informed me about the little black washers that came in the tool bag. They go on the trigger pins. Try one and then fire the gun as you normally would. You may need the second one. If that doesnt work then the activation point on the trigger setting may be too close to start(my other problem). Try making it activate later in the trigger pull. Hope this helps.

[tgallo]

hi,

I've a G7 Fly... the manual says that it has 2 vernier wheels... but my G7 Fly only has 1 vernier wheel!!! Is it a bug on the manual or am I missing something?!?!

The G7 Fly comes with the G7 manual plus an addendum page to note the changes. Maybe you could get a copy of the addendum from someone here.

[Raven99]

Ok, problem solved!!
thank you guys.

Raven99