Hammer adjustment?

[led972]

Hey guys, ok here is my problem, when i close the breech the pin on the bolt barely hits the hammer.Do i need to adjust the hammer?How do i resolve this problem?:notsure:
Thanks,
Rob

[fife]

Quote: Here is what and how to do it and why your seeing what you are. Ok first the thing you need to understand is when checking your breach door for proper adjustment the gun must be gassed. If you check it without gas going to it it will mean nothing. So don’t test the breach adjustment without gas going to it. When you gas the gun you must turn the ram tool clockwise until the breach door clicks into the hammer slot at the front of the stroke. If you go too far, degas and back off and start again. (Do not go backwards while its gassed) re gas and re adjust.