help with adjusting to lp..and spool "extraction"

[spartanville212]

hi i have and angel g7 fly and i was just wondering...after i take out the end cap and the adjustment screw and locking screw thing...how do i take out the spool..it says to take it out with an m3 screw and "gently extract" what does that mean?...all im trying to do is take out one of the washers and make it work with my hp tank....thanx

[BAKERmancan]

I am going to assume that by 'spool" you mean the LPR assembly...

To COMPLETELY disassemble your angel paintball marker you should 1st purchase a set of angel tools. Included in this set of tools is the "m3" screw thing your talking about.

If you look closely at teh LPR assembly (while it's in your gun still) you should see a round brass piece with a hole in the middle that is THREADED for the screw you speak of. You simply screw it into the hole and gently remove as you said. This will give you access to your LPR springs and SHIMS (washers you called them)

VERY IMPORTANT: make sure you put your spring stack back in order when finished. the springs are not flat they are concaved and should go in like this...

spring order----> )()(

[spartanville212]

wait..how do i change my marker to hp then...i thought it was in the vertical reg....i have a 47/3000 tank...and a g7 fly...what do i do to make it work....help

[red1]

Try it first some guns run hp ok if you have trouble getting you fps below 300 fps then change it.

[Shades]

Simple run a LP pre-set air system on your marker. Your marker is LP so why try running HP on it.

Don’t mess with the marker sort your air out……………

If you purchase a Diesel car you don’t try putting Petrol in it do you. (Gas or what ever you call it over there)

[challer2000]

He is right your problem is that your tank is HP. The fastest way about doing this it to convert your HP to LP that will soak you around $25 or you can just buy a new reg and simply screw it in. Which is a lot easer to do and its safer on the marker. + when you use HP on a LP marker you will be shooting over 300fps at first and you will not be able to turn down past 260fps.

[red1]

Lp is better that is what it is designed for.

[BAKERmancan]

yeah i thought you were trying to make it shoot normal or just fix a problem you had...dont try to make a LP gun run HP on the inside.