Angel One Barrel Tip !!!

[corellon]

Someone know if the Angel One Barrel tip will fit on other back...like ultralite :-)

thank

[GTOnizuka]

I am curious about this as well.

[John Rambo]

Any barrel that uses the new threads will fit in to the stiffi swich kit size breaches.

[Devs]

Any barrel that uses the new threads will fit in to the stiffi swich kit size breaches.
Interesting, but that wasn't his question.

As for the question, I doubt it. Barrel makers are fond of the proprietary concept, so I'm sure it'll be unique threads and design.

[mercui2y]

Does its the 1 use G7 fly barrel threads or are they new.

[JeffW]

My 2 piece CP barrel on my G7 Fly wouldn't fit my 1.

[BoB]

Does its the 1 use G7 fly barrel threads or are they new.

The threads are the same, the only change was the length of the shank. The Angel One's shank is a little shorter. The One's come with a beauty ring so the threads are not visible on the Fly barrels. I have an Orbium 2 on mine and it fits fine.

[Speedy_in_Blue]

I've work at a machine shop and was thinkin of milling the shank on my CP barrel down a little, got a CP sponsorship so I gotta use their stuff.......cause i tried it with my CP barrel and my Ultralight and my Stiffi and they dont screw in far enough...........like, there is a gap between the back of the barrel and the body INSIDE which cause nasty stuff to happen while shooting.

[BoB]

Not going to help you if the OD of the barrel is too thick. I just put a Dye back on without issue and as I stated previously, my Orbium 2. With the shank being longer on the Fly/06 barrels, the only way it would not butt up to the inside lip of the breech area would be if the OD of your barrels is too thick. I will test a CP barrel tomorrow and see what I find but so far the Dye and orbium go in just fine. Now if you are referring to the gap in the front of the threads by the barrel then yes you will see threads. This is why they come with the beauty ring.

[Speedy_in_Blue]

nvm, i was just looking at it to, must have been seeing things about the inside of the gun not going in.