LCD giving me a headache

[dirka_dirka]

I bought an LCD for 200 a while back, i had it drilled and cut for the orignal DM mod, but when the lucky board came out i decided to buy that, I received my board only to have this problem, when I touched the pos conductor to the pos conductor and vise versa the noid clicked but the board didnt turn on, I reveresed the wires and the problem only reversed when I touched the neg conductor to the pos conductor and vise versa the noid clicked but nothing turned on, so I sent the board back and got a replacement but it had the same problem. I just bought another LCD solenoid because that is the only thing I could think of, also when i used the DM4 board it would not turn on so I am asking anybody who knows anything that might be wrong with my angel please help. thanx

[warpedx]

What chip do you have on your lucky board? Checking the corresponding manual for that will give you info on how the software works. Remember to look at the DM version of it, since that is what the lucky board takes.
As far as the connectors, I'm not quite sure what you're saying.
If you got the solenoid to click, it should be ok. Putting a 9V battery on the board and the solenoid wire into the board should be all it needs to make the gun function.

[dirka_dirka]

I'm using a DM4 M3 chip, and what I mean is:

when i take the big circle on the 9v and touch it to the big circle on the power harness the noid clicks but no LED turns on or anything when i cut and reversed the wires so its black to red and red to black the problem changes to where if i touch the little circle on the 9v to the big circle on the pwer harness it clicks but no LED turns on so I'm thinking its my noid

if i send it to a MT and getting it teched would he be able to fix it up even tho its has DM4 eyes, chip and a lucky board? and maybe the noid problem