Velocity problem

[Viper200929]

I was at the local field today and i went to chrono my IR3 and when i did it said 240 and then i shot it again and it went to 135 and it just kept going back and forth. Do you know whats going on. Thanks for you help

Viper

[Emmit]

I had really erratic velocities like that once, and my hammer was loose on the ram. That might not be it, but it's a good place to start. Also you want to check that your LPR is set correctly, and that your mini-reg is clean. How bad was the paint? If you've got really bad paint a bad paint/barrel match will give you really erratic velocities

[MorpheusX]

funny .. this happened to me today as well...
i got a new max flow on it as well and i cleaned it and everythig . i have never cleaned the mini reg and i dont know how to so i dont know if thats it . how do you chekc if the hammer is loose?

[Emmit]

in order to check the hammer you have to pull the Ram assembly, so you'll need the tool kit. However it would be far easier to check that as a last resort. Check your LPR, and then the minireg.......to clean the minireg you have to remove the snap ring and then the piston and springs ball etc....make sure it's clean, grease it and put it back together.

[GaLLi2k6]

I would just take it to yourt nearest WDP tech. Theyll know. Mine did the same thing but not bad jumps. You prolly have a blown LPR.

[cameroncarnes]

I had the same problem on my Dark. I had to get a new reg. Get a black ice reg.