PDA

View Full Version : Trigger shims

Experiment626
03-20-2003, 06:05 PM
First off how do you remove the trigger from the frame? Can you put some kind of shim on either side to cut down the side to side movement? As of right now the travel side to side is almost triple the front to back! My marker rips as it is I just want to fine tune it. Thanks for the help!
Jedrith
03-20-2003, 06:26 PM
No shims...they make different triggers that are fatter to take up the side to side.
matthepepe
03-20-2003, 07:06 PM
id definitely look into the cobra trigger.
Experiment626
03-20-2003, 07:12 PM
so I need a new trigger?
Jedrith
03-20-2003, 07:13 PM
Unless you want to drill into your trigger frame to tap in fugly set screws.
Prophet
03-20-2003, 10:50 PM
you can use tape or other things like that, its not unheard of.
Experiment626
03-21-2003, 01:06 AM
Now how do you get the pin out so I can try some home made shims?
matthepepe
03-21-2003, 01:29 AM
i havent seen the 2k3 lcds, but if its like the originals you can just tap the pin out the one side, im not sure which side, but it should only come out one way.
Prophet
03-21-2003, 09:41 AM
Put the LCD side down, and push from the non-LCD side (so the pin comes out the LCD side).
bunkerd50
03-21-2003, 10:33 AM
i sottered(sp) mine and i am now getting 14 easy
bunkerd50
03-21-2003, 10:34 AM
but im soon upgrading to a lasoya trigger very very very nice
Experiment626
03-21-2003, 02:02 PM
Sweet thanks for the help I didn't want to distroy any thing!