G7 New problem

[DamageLn]

Hey guys , im a new poster and recent owner of an Angel G7.

First off I bought the gun and went to get a drop foward for it. I had all that set up and when I gassed up the gun, it was immediately leaking air everywhere. So I sent the gun back to be fixed.

A couple days ago I get the gun back,got her all set up and ready to go

Crossfire 68/4500 Empire reloader B
All stock setting on the gun as I have not had much time to play with it.

I go to fire the gun (no leaks yet) The gun fires 1 paintball blows an excessive amount of air out of the barrel, the trigger does not move back to standard position for a few seconds. So I fire it again and the same thing happens. Roughly 4-6 balls where fired before my tank was empty and I am left wondering what the hell is going on. As far as the gun settings go I presume they are stock? Since I had the gun worked on.

Any ideas ??

Thank you
~Wayde

[hgroberts]

Open up your mini reg, could be lpr, but I dont think your bolt is coming back.

[Sportsman]

could also be that your trigger is set to close, I set my trigger to far in once and it got stuck and slow return

just a thought

[DamageLn]

tried polishing the exhaust bolt, I wont know if that cures anything until I get air in my tank and I try the gun again... I'll keep it posted

[Crazy99]

Do you have a LP or HP tank? Aslo what is your dwell setting?

[golobulus]

the trigger motion should be irrelavent to the gun shooting, it should return easily. it might be your trigger setup. try to make your trigger longer so the activation is in the middle and see what happens.

[DamageLn]

I have a LP tank (crossfire 68/4500) I'll post the dwell setting when I get home. But I believe it was on 12 or 13 but I dont remmeber

[hgroberts]

lower it to9