velocity adjustment??

[ruler24]

my velocity is too low and i have no idea how to change it. and i have looked at the manual on here and the page doesnt work.

[thog94]

Here is a link to the manual for future ref: http://www.wdp.tv/manuals/

All you need to adjust the velocity is a 3mm allen key. The velocity adjustment screw is located on the mini reg towards the bottom.

Turning the screw CLOCKWISE will DECREASE the velocity.
Turning the screw COUNTER CLOCKWISE will INCREASE the velocity.

[ruler24]

ok well ive done that and my velocity is still around 150 no matter what. so can you explain that for me cuz i dont know what to do.

[thog94]

You will need to check your input pressure from you tank, are you running a HP or LP tank? You will also need to check your LPR pressure. You will need the tool kit to check your LPR pressure.

[ruler24]

see i thought it was my lpr pressure but i have no way to check it. when i get time ill see if i can go to a shop and check that. my reg and input pressure is fine.

[ruler24]

ya the shop i go to cant check my LPR pressure. they dont have the stuff to check it.

[warpedx]

If you feel confident teching your marker, you can pick up an angel tool kit of your own. Any of the sponsors at the top of the page should have them.

[Dragonsprayer]

you need to send it to ken!