PDA

View Full Version : do i have an eye problem?

capuchino
03-30-2006, 05:44 AM
hey guys i just goy my 06 joy division today... and i was checking it out and i see that my gun's eye's doesn't turn on! , the work but...the laser isn't on do u guys know what's the problem with that?!
warpedx
03-30-2006, 10:55 AM
You say they work, so I'm guessing you did the drop test, or ran paint through it? Could be that an older set of eyes slipped in there somehow, did you get it new or used?
golobulus
03-30-2006, 01:57 PM
if the laser doesn't light up, its probably a defective eye. verify that the eye is truly working by either the drop or breaking the beam with your finger.
Won Hunglo
03-30-2006, 08:05 PM
Drop test. Passes? Then you have old eyes before the red ones. GO play paintball. Fails? Check the plug in to the board & drop test again. Still fail? Replace them.
rix123
03-30-2006, 08:44 PM
...check the settings to make sure the "eyes are turned on" and what the eye mode is set to, i.e., "forced" ..etc.
capuchino
03-31-2006, 04:12 AM
my gun is new... and... the lazers doesn't light up i don't know why!! and i do the "EYE TEST" then i drop the paintball in to the feed and nothing say's on the lcd... i was specting that say "PASS" or "FAIL" but it didn't say nothing can somebody tell me what's happening? please! :S
tgallo
03-31-2006, 08:06 AM
my gun is new... and... the lazers doesn't light up i don't know why!! and i do the "EYE TEST" then i drop the paintball in to the feed and nothing say's on the lcd... i was specting that say "PASS" or "FAIL" but it didn't say nothing can somebody tell me what's happening? please! :S

sound like the eyes are not working....it should say "PASS".

Check to make sure they are attached properly to the board. Then chech to make sure they are inserted in the body properly so that they are lined up. If everything still doesn't work you probably need new eyes.
capuchino
03-31-2006, 07:50 PM
the problem with my gun's eye's is now fixed, i took it to the store where i bought it and the eye's wire were cutted that was the problem so i have new eyes now :D tnx for your replys guys! they were helpfull! so i think i'll read u later! tnx again!