Predator V3 ?'s

[MVpaintball]

Hey, I currently am about to purchase a G7 w/ a Pred V3 board in it. I was wondering if the board is still able to be a "drop-in" on newer angels, like the GAT or G7 FLY.
I only ask because I heard something about how the reason there are diff versions of the Tadao board is that the microswitch didnt line up properply. Though all the brackets are the same, right? I know its originally a "drop-in" board, so i didnt know if soemthing get permanently adjusted depending upon model

So could I take the board out of my G7 and put it in a G7 Fly or Gat, with no compliance issues? Thanks for any info, M.V.-(508)

[warpedx]

Not sure exactly what you are asking here. I ll just say that G7 and G7 Fly boards are interchangeable, and Speed 05, 06, and Gat boards are interchangeable. The mounting holes are different in these two groups, the G7 set uses a rechargeable battery, the other group uses a 9V. The bottom hole is moved to make room for the battery.

[MVpaintball]

I PM'd a guy on here who has the same board in the BST and he said it has like little ummm flanges; and as long as the other flanges not used in original install weren't broken off once installed, I should be ok. Thanks