lefty21
03-14-2006, 10:42 PM
OK...I was extra excited to go out to play this past weekend because I was dying to test my NEWLY installed MT Intelli system. I have my g-fly tricked in angel force aftermarket parts: Tadao and force valve along with, obviously, the MT intelli system...Set on mode 1, semi-auto, uncapped.
Ref: "THREE!...TWO!...ONE!...GO! :blasting: I freakin ripped on this thing!. I was like OMFG!!! :shocked: I mean, of course I definintely threw ropes before, but not like this. :smile:...Now I've never out-shot my halo, but I have noticed inconsistency in the trigger pull-to-Halo spin...kind of like a hiccup. Absoulutely not with the MT intelli...I went the extra mile a bought two cases of paint and in those 4k shots, not one delay, hiccup or inconsistency. The dwell time was precisely and perfectly set to the feeding speed, which can not be done as precisely with ANY aftermarket board...Essentially this ability makes for kickass speed, consistency, and an absolute guarantee of non-choppage...Another thing that I've noticed about using my halo (V35, with a ghetto PR mod) is that it has always been rough on paint, even breaking paint causing a gooey barrel from barrel breaks and a build up of paint between the breech and the feedneck...with the MT intelli, in 4K shots not one barrel break, no paint build up between the breech and neck and in checking my halo at the end of the day :cry:...I was sooo pleased I was moved to tears. Finally one of the BIGGEST benefits of this new MT intellifeed system is that the halo has independent capabilities...What this means in laymens terms is if my MT intellifeed wire happens to disconnect unnoticed it will continue to run independent of the MT intellifeed connection and run off of its own eye logic...SWEET! All I have to say is my brother runs with a DM6 and asked me how he could get his marker intellifeeded, I told him to get it done right you need to GET AN ANGEL!!! Ha!
Things to note:
The new MT intellifeed works with both the stock and aftermarket tadao board
Needless to say, the wireing and drilling work is CLEAN as hell
The mod is a drop-in modification
Ref: "THREE!...TWO!...ONE!...GO! :blasting: I freakin ripped on this thing!. I was like OMFG!!! :shocked: I mean, of course I definintely threw ropes before, but not like this. :smile:...Now I've never out-shot my halo, but I have noticed inconsistency in the trigger pull-to-Halo spin...kind of like a hiccup. Absoulutely not with the MT intelli...I went the extra mile a bought two cases of paint and in those 4k shots, not one delay, hiccup or inconsistency. The dwell time was precisely and perfectly set to the feeding speed, which can not be done as precisely with ANY aftermarket board...Essentially this ability makes for kickass speed, consistency, and an absolute guarantee of non-choppage...Another thing that I've noticed about using my halo (V35, with a ghetto PR mod) is that it has always been rough on paint, even breaking paint causing a gooey barrel from barrel breaks and a build up of paint between the breech and the feedneck...with the MT intelli, in 4K shots not one barrel break, no paint build up between the breech and neck and in checking my halo at the end of the day :cry:...I was sooo pleased I was moved to tears. Finally one of the BIGGEST benefits of this new MT intellifeed system is that the halo has independent capabilities...What this means in laymens terms is if my MT intellifeed wire happens to disconnect unnoticed it will continue to run independent of the MT intellifeed connection and run off of its own eye logic...SWEET! All I have to say is my brother runs with a DM6 and asked me how he could get his marker intellifeeded, I told him to get it done right you need to GET AN ANGEL!!! Ha!
Things to note:
The new MT intellifeed works with both the stock and aftermarket tadao board
Needless to say, the wireing and drilling work is CLEAN as hell
The mod is a drop-in modification