GAT Tadao issue

[aviscomi]

While playing today I ran into a problem wiht my Gat. I have the Tadao board and it worked fine for the 1st 2 games, then for some reason everytime I turned on the gun a round would fire. Any thoughts?

[BoB]

Check you trigger adjustment. It sounds like your trigger is activated when you turn on the angel.

[aviscomi]

Check you trigger adjustment. It sounds like your trigger is activated when you turn on the angel.
I thought that too...but I'm somewhat confused on how to adjust it. Should it be making contact with the switch on the board? Should I be adjusting the Verniern or the screw inside the trigger itself?

[ralfelor]

Adjust the trigger with your vernier wheels first. Then set the toe (trigger screw) afterwords for finer trigger adjusting (I think this may be on the manual so you can peep that out for help).

Be sure to set the toe screw back from the switch first before starting.

Hope this helps..later

Ray-Ray

[aviscomi]

It seems as if my problem is the Tadao; it doesn't accept any programming commands. I emailed & pm'd Ken; hopefully he gets back to me before the weekend arrives.