A few ?'s

[dyekid05]

ok, i just got my 04 A4 Fly yesterday and i LOVE it. It has 3.2 software which im goin to get upgraded. But my questions are when i turn it on it makes this beeping sound, then when i pull the trigger it goes away. Then when i push a button to scroll through the list it starts the beeping again. And my other question is i went out to shoot it today and i had the eyes on. The MROF was set at 21 but i know thats for the eyes off, but when i started shooting it would only shoot like 13. And i know i can shoot faster than 13, here is a vid to show u. HELP ME!

http://www.pbnation.com/showthread.php?p=20510307#post20510307

[bigfootimp]

Ok the sound that you are hearing is the backlight behind the lcd display. This is a normal thing and nothing to be worried about. Any time the light is on it will make the noise. As for the rof it might just be your trigger adjustment, might be low batteries in the hopper which alot of people don't think about but is very common especially if you are using a halo-b or empire reloader-b. Try putting fresh batteries in it and dry firing the marker without the hopper to see if you can get beyond the 13 bps. If you can chances are that its the batteries in the hopper.

[paintreliever]

also, put the tr up and what board is in your halo?

[dyekid05]

I have the stock halo board, im gunna get some more batteries today but i dont think that was it. And the tr is at 1. What should i put it at?

[bigfootimp]

tr1 is no "bounce". bump it up to about tr4 and see what happens.

[paintreliever]

if you really want it to go fast, bump it up all the way
and the stock halo board really isnt that fast, when i had my stock board it was going 15, max, but when i got my victory in it, i could shoot around 25ish all day

[dyekid05]

ok, well i put the TR up to 5 and it still didnt do ne thing. I didnt try a different hopper, but i will try that tomorrow.

[bigfootimp]

When you tried it with tr5 did you try it with or with out paint? If i remember correctly the tr settings only work if the eyes are on but I am not sure because I never used any setting beyond tr1.

[dyekid05]

I had it on tr5 and it didnt do anything but make it bounce some, it still wouldnt go over 15. But i think it might be the hopper cause it seams like my hopper is really slow. Im gunna get a victory board soon, but im gunna try to use my friends and see if his works.

[dyekid05]

ok, i just got back from the field and i tryed a different hopper and it still didnt shoot ne faster. It seems like its capped at 13, is there like a tournament lock that might be on?

[bigfootimp]

no there is not a tournament lock on the board. Here is an idea, check your lpr pressure and make sure that it is around 60 psi. Also while you have the end cap off lube up your o-rings. The reason for this is I think that your lpr might not be recharging fast enough to support the rof. If this doesn't work then I am out of ideas unless someone else can shoot the marker faster than you.

[dyekid05]

would i have to have one of the gauges that u put in the lpr to do that? Cause i dont have that tool, and i let my friend shoot it and he couldnt get over 15. I was getting 15 yesterday, then 13 today. I just lubed my ram today, what do i lube in the lpr?

[bigfootimp]

When you remove the end plug there is a brass piece in there that you can remove using the angel tool kit or a screw from the lcd 14 way cover. Be careful because of the spring stack that will come out with it. There is an oring on the brass piece, just lube that up and put back in the marker making sure that the spring stack is in the right way, )()(. use this link if you don't have the manual http://www.wdp.tv/manuals/index.htm?fly/01.html

*NOTE: normally I would recommend removing the entire lpr unit and lubing up each oring which is much more envolved but since this is a recharge problem that you wish to be resolved relatively fast, simply lubing up the o-ring on the brass piece will suffice.

[dyekid05]

how do i get it out, just like pry it out or does it screw in?

[bigfootimp]

Pretty much once you have the screw in the brass piece it should just pull out.