Is it supposed to do this?

[Koolborderxtrme]

Is the board supposed to ramp when its in normal uncapped semi auto? On my gun I'm just shooting normally and it has a random ramp burst sometimes.

[Magnum PI]

You might be bouncing. Either raise your CPF or raise your Debounce. This should take care of it...

[esandov]

Def sounds like bounce, especially when you say its random. Pull the trigger back very lightly and very slowly...if it fires multiple times you are bouncing. The CPF should take care of some of it (I have mine at LED 2=%10) and I cant get it to bounce...but then again the trigger is set long at about 2mm.

[uniquenewyork15]

just turn the bounce settings as to where there should be no bounce, try it and find a balance as to where you like it and where theres no bounce

[Koolborderxtrme]

well its once i get above a certain speed it starts to bounce. but its not ramp start cuz that only has an effect on the ramping modes.

[esandov]

As you increase the rate of fire, the way you pull the trigger has to change to accomodate the pulls. So it may be that pulling the trigger slowly may not give it a chance to bounce, but that as you pull faster...and the trigger return time shortens...then there is a bouncy sweet spot.

[uniquenewyork15]

if you adjust the bounce settings/play with them a while until there not bouncing anymore, it wont bounce. its not that hard.
ps. ^^^your avvy is pissing me off lol