View Full Version : intelifeed
KEN CRANE
02-25-2006, 08:31 PM
hmm
firemedic30
02-25-2006, 09:20 PM
Ready yet???? LOL!!
Damn, those look nice!
KEN CRANE
02-25-2006, 09:21 PM
Ready yet???? LOL!!
Damn, those look nice!
see how easy that one looks? lots easier than the way yours is.
firemedic30
02-25-2006, 09:22 PM
Real nice looking!!! Can't wait!
Fly-n-High
02-25-2006, 11:06 PM
I like it also. The circuit size (amout of necessary circuitry) seems small. I have some ideas for it once it becomes available for retail purching.....
Skinny C
02-26-2006, 02:22 AM
if i have the intellifeed from impact (jalo), is all i need is whats in the second and third pic.....?
Trigga Nometry
02-26-2006, 02:03 PM
So that can be used on the stock WDP board too not just the Tadao? I ask because I see the STOCK and the TADAO labeled.
Th3bLaCkNiGhT
02-26-2006, 02:19 PM
im officially excited ...
will this work with a reloader b? or do i have to buy another halo? just asking because i sold all my halos (ihalos included) and bought reloader bs since i bought tadao ... no biggie if it doesnt work w/ them though
KEN CRANE
02-26-2006, 03:37 PM
if i have the intellifeed from impact (jalo), is all i need is whats in the second and third pic.....?
sorry nope. not tested yet. we never accepted that as a correct way to inteli feed a halo. i will be glad to test one if someone would send me one to use.
Th3bLaCkNiGhT
02-26-2006, 03:54 PM
hey ken ... how about a reloader b?
Magnum PI
02-26-2006, 04:12 PM
So like everyone else wants to know, is it ready for us to send our guns in or purchase the kit to do it ourselves?
Mavrick
02-26-2006, 04:34 PM
So that can be used on the stock WDP board too not just the Tadao? I ask because I see the STOCK and the TADAO labeled.
Trigg,
You got a prototype board that was only designed for the Tadao.
This production board does both in one package! Pick your poision, er um I mean Stock or Tadao.
All information will be released on Tuesday.
Magnum PI
02-26-2006, 06:44 PM
Thanks Bob!!!
Th3bLaCkNiGhT
02-26-2006, 10:17 PM
im ready! tuesday is a big day in my book!
Skinny C
02-27-2006, 04:19 AM
ken,
i have my jalo just sitting at home not doing anything, b/c my 2 force's have the tadao. i would be willing to send the hopper (jalo) to u. so u can look her over?
firemedic30
02-27-2006, 05:56 PM
Skinny C, the problem is not "per say" with the Jalo. This new intellifeed mod will fix it.
josh_hill
02-28-2006, 08:51 AM
So I reckon today is the big announcement day...:)
Magnum PI
02-28-2006, 09:10 AM
So what you got for us Ken and Bob? Are we antsy or what!?!?
WDP Shooter
02-28-2006, 06:00 PM
All information will be released on Tuesday.
hey BoB, it's Tuesday, I stayed home tonight to read this information and hopefully place an order... ticktockticktock...
::ding fries are done::
i am on the west coast so there is still 9 more hours to my work day.
thog94
02-28-2006, 06:42 PM
i am on the west coast so there is still 9 more hours to my work day.
:owned:
If the MT's say they will deliver, they will deliver. Just have some patience.
WDP Shooter
02-28-2006, 08:05 PM
i am on the west coast so there is still 9 more hours to my work day.
sorry, sometimes my brain crashes and forget the world doesnt revolve around east cost time...
Vantage_TeS
02-28-2006, 08:16 PM
Sure it does, just some people are behind on the times ;)
KEN CRANE
02-28-2006, 08:40 PM
sorry, sometimes my brain crashes and forget the world doesnt revolve around east cost time...
bob will post in a little while. hes 3 hrs behind us here on the east coast.
Th3bLaCkNiGhT
02-28-2006, 09:27 PM
sorry, sometimes my brain crashes and forget the world doesnt revolve around east cost time...
lol ... well same thing happens to me ... but i forget that the world doesnt revolve around me! :stooges: stupid stupid me ... im ready for order info though ... but im patient enough ... im sure bob will follow thru w/ his word
GO BOB
firemedic30
02-28-2006, 10:45 PM
bob will post in a little while. hes 3 hrs behind us here on the east coast.
I'll be waiting......that's for sure!
New intellifeed is ready for sale. We will start shipping orders by Friday. Prcies are as follows.
$50 plus shipping to purchase and self install
$69.95 and up plus shipping to purchase and have us install
rix123
03-01-2006, 02:56 AM
Just checked yours and Ken's site, didn't find a link for this...any particular method desired to get orders in? Thanks!
New intellifeed is ready for sale. We will start shipping orders by Friday. Prcies are as follows.
$50 plus shipping to purchase and self install
$69.95 and up plus shipping to purchase and have us install
I'm sure other people are wondering this, but since I don't already have intellifeed installed, can I still just order a kit? Or is it absolutely necessary to send my gun in?
LOL... not that I'll be using it any time soon seeing as how we still have feet of snow on the ground.
josh_hill
03-01-2006, 09:12 AM
Devs,
$50 plus shipping to purchase and self install
Trigga Nometry
03-01-2006, 09:34 AM
Sounds like maybe Devs is asking about those that might need to have their guns milled for the plug.
Just checked yours and Ken's site, didn't find a link for this...any particular method desired to get orders in? Thanks!
I have a quite a few pre-orders and just not had the time to update the site. I will have them up soon. If sending in the marker all one needs to do is complete a service request and mail in.
I'm sure other people are wondering this, but since I don't already have intellifeed installed, can I still just order a kit? Or is it absolutely necessary to send my gun in?
If you are doing the self install you will need to mill the cover plate.
Squishy OWNS YOU!!
03-01-2006, 10:29 AM
Okay now since the Intelifeed has been realesed time to ask some questions:
1. When I send in my gun to have it installed I must send in my gun and hopper correct, for $60?
2. My Angel marker cycles at 31bps and if I used the "gangster mode" for example on my tadao, will my board feed at 31bps?
3. Is the board directly controled by the trigger? And if so will it have the capasity to go to max marker fire rates in feeding (meaning it feeds at 31bps)?
Thank you. And I would perfer an MT to answer this question so that I can thourghly understand this product but if you know a good insight please post.
What do I need to take an existing intellifeed (that works with my stock board) and convert it to work with my Tadeo?
Fly-n-High
03-01-2006, 12:23 PM
Can we do the install by ourselves and send only the cover plate in for milling purposes? That is the only part that I cannot accomplish myself.
WDP Shooter
03-01-2006, 12:45 PM
oooh goody, goody!!!!
gotta order up, ding!
Squishy, with the tadao board, it is POSSIBLE to exceed 31bps. 31bps is a cap that WDP put on their stock boards. The tadao can exceed that in modes with unlimited rof. I use the tadao and a victory halo and it rips a heck of alot faster than with the stock board, but ultimately it will depend on how the MTs are using, or bypassing the stock halo boards. If they are not bypassing the current draw , then you will still have a halo that feeds a bps in the mid 20's only because of the restrictions with the board for draw to the motor. I would assume that to exceed 31bps, you will need to upgrade your halo with a victory/cheetah/angry board, which ups the current draw to get into the feed rate of 35bps or more. I am no MT, but I did alot of intellifeed research until this point,and only my gutted ihalo (motor, 9v, and relay) spin at high rates of speed without a custom board.
the intellifeed typically adds response to the intellifed hopper by bypassing the logic needed to see/feel/hear the paint to trigger revolutions/agitation in the hopper. I dont think it will make a stock halo spin so much faster that it will allow you to exceed the 31bps mark you are trying to reach.
again, I am no MT, but just wanted to offer my knowledge...
Th3bLaCkNiGhT
03-01-2006, 03:29 PM
my question has yet to be answered ... but now that it is out ... im hoping for it to be answered soon ...
will this work on a reloader b?
also, what does the self install consist of?
Thats more of the question I should have been asking. Can we just send in out the cover plate along with out money for the kit?
After some recent snafus, I prefer to not deal with shipping companies with something as important as my gun. But if its not an option, I'll send the whole shibang.
WDP ir3 2k3
03-01-2006, 06:34 PM
sorry nope. not tested yet. we never accepted that as a correct way to inteli feed a halo. i will be glad to test one if someone would send me one to use.
I Got a jalo if you want to test and see if it will work with the tadao bord
KEN CRANE
03-01-2006, 09:29 PM
I Got a jalo if you want to test and see if it will work with the tadao bord
please do
Speedy_in_Blue
03-01-2006, 10:06 PM
how do i order the self install, i work at a machine shop, and run a mill, i can do the milling my self no problem
Squishy OWNS YOU!!
03-02-2006, 09:26 AM
oooh goody, goody!!!!
gotta order up, ding!
Squishy, with the tadao board, it is POSSIBLE to exceed 31bps. 31bps is a cap that WDP put on their stock boards. The tadao can exceed that in modes with unlimited rof. I use the tadao and a victory halo and it rips a heck of alot faster than with the stock board, but ultimately it will depend on how the MTs are using, or bypassing the stock halo boards. If they are not bypassing the current draw , then you will still have a halo that feeds a bps in the mid 20's only because of the restrictions with the board for draw to the motor. I would assume that to exceed 31bps, you will need to upgrade your halo with a victory/cheetah/angry board, which ups the current draw to get into the feed rate of 35bps or more. I am no MT, but I did alot of intellifeed research until this point,and only my gutted ihalo (motor, 9v, and relay) spin at high rates of speed without a custom board.
the intellifeed typically adds response to the intellifed hopper by bypassing the logic needed to see/feel/hear the paint to trigger revolutions/agitation in the hopper. I dont think it will make a stock halo spin so much faster that it will allow you to exceed the 31bps mark you are trying to reach.
again, I am no MT, but just wanted to offer my knowledge...
Thanks :cheers: .
WDP ir3 2k3
03-02-2006, 09:32 AM
please do
Should i call you to work thing out?
What do I need to take an existing intellifeed (that works with my stock board) and convert it to work with my Tadeo?This seems like a simple question. Anyone?
firemedic30
03-02-2006, 10:43 AM
Do you have a Tadao now? What current intellifeed do you have?
The problem with all of this was the fact that the majority of the current intellifeeds out there ran a relay that tripped at 5 volts. The Tadao was designed to trip at 1.5 volts. So, the relay would not work.
If your current one trips, then it won't be a problem. If not, get this mod!
firemedic30
03-02-2006, 10:44 AM
I Got a jalo if you want to test and see if it will work with the tadao bord
It won't. The JALO and Tadao are not compatible!!! That's what I had.
Do you have a Tadao now? What current intellifeed do you have?
The problem with all of this was the fact that the majority of the current intellifeeds out there ran a relay that tripped at 5 volts. The Tadao was designed to trip at 1.5 volts. So, the relay would not work.
If your current one trips, then it won't be a problem. If not, get this mod!
firemedic- I do have the Tadao board in my marker now, and it does not trip the intelifeed. I purchased the marker with the intelifeed already installed, so I am not sure what kind it is. Is there a way for me to tell what I have? I can post pics if that would help. Thank you! :patriot:
firemedic30
03-02-2006, 11:08 AM
Yes, try that!!
Gracias! As soon as I get home from work I'll produce some pics for you. Thanks again.
If you want the full benefits of this new system you will need to convert your loader back i.e. re-install eyes, board etc... Our new board allows the loader to operate even if the Halo becomes unplugged from the angel.
firemedic30
03-02-2006, 01:34 PM
That is a good point Bob.
People need to realize that your need to get the old wiring back for this to work.
When you are done, there should be no relay, just the old wiring.
Th3bLaCkNiGhT
03-02-2006, 02:59 PM
still no answer...
will this work on a empire reloader b???
someone plz let me know
firemedic30
03-02-2006, 03:04 PM
I am not an anuthority, but all this does is work with the exsisting board and overides the eyes and make it "believe" that there is no ball. That is what allows the hopper to spin.
With the reloaders being sound activated, I am not sure. I don't think that they were even tested.
Again, don't quote me, but I don't think they will?
Th3bLaCkNiGhT
03-02-2006, 03:56 PM
well i wont quote u ... but at least u answered my question or rather attempted it .. i guess ill use my reloader w/ my predator ... and buy another halo
PredatorReloaded
03-02-2006, 04:19 PM
Currently the new intellifeed kit will not work with the Reloader B. It looks like they will be ripping apart a Reloader this weekend and see what they can work out.
IwanaANGEL
03-02-2006, 07:33 PM
No intelli for Reloaders?? :angry:
I'll galdly lend mine for some testing :evilgrin:
Here are the pics of my intelifeed. I wasn't sure what you needed to identify my set-up, so I took several shots. Let me know if you need a better/different look at anything. Just describe it (me no talk techie :)) and I'll do my best. Thank you!
http://www.pbase.com/image/56736426.jpg
http://www.pbase.com/kemmitz/image/56736437.jpg
http://www.pbase.com/kemmitz/image/56736440.jpg
http://www.pbase.com/image/56736534.jpg
http://www.pbase.com/kemmitz/image/56736457.jpg
http://www.pbase.com/kemmitz/image/56736458.jpg
GMG Force Fly
03-02-2006, 08:31 PM
Here are the pics of my intelifeed. I wasn't sure what you needed to identify my set-up, so I took several shots. Let me know if you need a better/different look at anything. Just describe it (me no talk techie :)) and I'll do my best. Thank you!
As-is that intellifeed will not work with the Tadao board.
Mavrick
03-02-2006, 08:50 PM
Here are the pics of my intelifeed. I wasn't sure what you needed to identify my set-up, so I took several shots. Let me know if you need a better/different look at anything. Just describe it (me no talk techie :)) and I'll do my best. Thank you!
Well from the great pic's you took... No the Jalo as is will not work. And it never will with this new setup. I cannot say personally that I tested this but I highly doubt it will work as the new design was not meant to work this way. Now the good news. Your half way there! Your cable in the marker is all good. You need the new board interfaced with the Tadao and the Intellifeed cable.
Bad news. Your loader needs a rebuild. You will need a board (any Halo board) and eyes replaced and rewired back to factory. Hook up your Intellifeed cable per instructions and your in business. Contact Ken or Bob for the replacement eyes and cable. Hope you got a board or they can get one to you as well.
Hope that helps mate and answers all the questions on the Jalo mod and this new setup...
KEN CRANE
03-02-2006, 09:37 PM
here is some info. when the guys get the stock (we will post them on our sites.) but for now look and ask away
As-is that intellifeed will not work with the Tadao board.
No kidding?
rix123
03-03-2006, 12:08 AM
here is some info. when the guys get the stock (we will post them on our sites.) but for now look and ask away
Excellent manual, well written!
Bob, Ken or one of the other MTs. If we so choose, can we just send in our Cover plate to have them milled and then install the kit ourvelves? Or do you require us to send in our gun and hopper? Thanks
firemedic30
03-03-2006, 10:49 AM
Yea, 1865, that is the JALO mod and like mentioned, won't work. You'll need to get the wiring and the new MT mod.
Th3bLaCkNiGhT
03-03-2006, 10:50 AM
i have a quick question about the self install. i am very confident that i will be able to do the install myself but what exactly holds the little circuit board into the gun? in the pic on the manual it looks like its taped up a bunch ... but idk
This early into the project, we would prefer to have both gun and hopper if we are doing the install.
This early into the project, we would prefer to have both gun and hopper if we are doing the install.
BoB, with my set-up, what kind of price would I be looking at? (I understand if you can't give an exact quote here, just ball-park is fine.) Thank you for your help!
An additional $40-$50 to bring the Halo back to normal. personally I woul just buy another halo and use one for parts.
firemedic30
03-03-2006, 01:33 PM
here is some info. when the guys get the stock (we will post them on our sites.) but for now look and ask away
Anyway we could get that in a Word doc???
thatguy!
03-03-2006, 07:58 PM
I have an A4 Fly, Cheetah, Tadao. Would that cost the base install price to do or more?
Squishy OWNS YOU!!
03-04-2006, 01:04 PM
I have an A4 Fly, Cheetah, Tadao. Would that cost the base install price to do or more?
$60 is the cost because the cheetah board is just a normal halo board. And the intellifeed is made to be used with the tadao board.
Trigga Nometry
03-04-2006, 01:08 PM
And the intellifeed is made to be used with the tadao board.Remember that the new MT Intellifeed can be used with the Tadao OR the stock WDP board.
Squishy OWNS YOU!!
03-04-2006, 01:30 PM
OR the stock WDP board.
That's awesome!
WDP ir3 2k3
03-16-2006, 08:08 AM
Does anyone know when the MT Intellifeed is comeing out. Becuz i got the jalo and i want my halo working soon with the tadao
Squishy OWNS YOU!!
03-16-2006, 08:57 AM
it has came out.
Th3bLaCkNiGhT
03-16-2006, 01:42 PM
it has came out.
well yes ... it is out but how can we buy it? ... it is not listed on any sites for sale so technically it isnt really out yet.
It is available and we have been installing. Just have not had time to list. We have had markers and loaders waiting for the install for weeks. Just email us and we will set you up with an invoice if doing your own install.
Skinny C
03-30-2006, 10:53 PM
is all the MT doing this or just Ken and Bob ? thanks guys...
WDP ir3 2k3
04-07-2006, 01:28 PM
It is available and we have been installing. Just have not had time to list. We have had markers and loaders waiting for the install for weeks. Just email us and we will set you up with an invoice if doing your own install.
How Much is the Do it your own self kit?
rfcompton
04-08-2006, 11:03 PM
Maybe i missed this but on the hopper side, this will work with a halo b/rip and a victory board? Or do i need the standard board?
GMG Force Fly
04-08-2006, 11:10 PM
It will work with any Halo board.
KEN CRANE
04-09-2006, 06:42 PM
How Much is the Do it your own self kit?
50.00 WITH THE WIRE KIT
Bang!
05-22-2006, 08:34 PM
where can we buy the intellifeed for tadao?
i dont understand how its working... will it keep the same speed of my victory board?
Trigga Nometry
05-22-2006, 09:04 PM
where can we buy the intellifeed for tadao?
i dont understand how its working... will it keep the same speed of my victory board?If you contact any of the MT's like BoB at www.fixmyangel.com or Ken Crane at www.performanceangel.com they can hook you up. They have been too busy to add it to their websites for order.
What the MT Intellifeed will do is make your loader load right after the trigger is pulled so that the loading of paint into the Angel will be super smooth AND you will still retain any features that your Victory board has. It is the best of both worlds. And if for what ever reason your Intellifeed becomes unplugged from the Angel, it'll still work just like you have just the Victory board working.
Question for the MT's: Are all the MT's installing the MT Intellifeed? Just wondering so that we can send people to the right place.
cyborg13454
06-14-2006, 12:58 AM
so if i have a stock halo board and i get the intellifeed can i get a new board later and just put it in the same as not having the intellifeed?
Trigga Nometry
06-14-2006, 08:38 AM
so if i have a stock halo board and i get the intellifeed can i get a new board later and just put it in the same as not having the intellifeed?Yes, that is correct.
thatguy!
06-24-2006, 01:45 AM
So, Trigga, got a video of your Intelli'd Cheetah yet? lol
Trigga Nometry
06-24-2006, 10:43 AM
So, Trigga, got a video of your Intelli'd Cheetah yet? lolI am working on it lol. Just have to make some time to get out there and film it. It seems like it has been raining forever here and I'd like to make the video with real paint rather than just Reballs. But YES, it works great!
Carapace
06-24-2006, 01:13 PM
i'm right behind ya trigga, my halo goes out to bob in less than a week to get my cheetah i-fed :)
thatguy!
06-26-2006, 01:56 AM
Woooo my Cheetah is going out tomorrow to be intelli'd too!
Methinks we need to start a club. lol
freakoutpaintballer
07-29-2006, 03:03 PM
so if i get the Intelifeed done with a stock board in my Angel, would i be able to just switch some wires to a tadao board (once i get one) or would i have to get the mod completely re-done?:puzzled:
GMG Force Fly
07-29-2006, 04:30 PM
so if i get the Intelifeed done with a stock board in my Angel, would i be able to just switch some wires to a tadao board (once i get one) or would i have to get the mod completely re-done?:puzzled:
With the MT intellifeed all you have to do is switch the blue and white wire from the plug that it is in , in the picture, to the one right beside it.
http://angelowners.com/attachment.php?attachmentid=40103&d=1140917652
vBulletin® v3.7.0, Copyright ©2000-2008, Jelsoft Enterprises Ltd.