Tadao doesnt work anymore? after 2 days

[WDP Shooter]

I got to play ball today for the second time with the tadao board. at the end of the day it was acting funny, then when I got home, it was going nuts. As soon as you turn the board on, it just starts cycling the solenoid. No air, no paint, just solenoind clicking like crazy and the LED are going all different colors... WTF. Is this thing under warranty? I got it at Impact, and its rediculous that this board is messed up. 2 days of play doesnt warrant a $150 board going bad. I swapped it out with the LCD board and the gun shoots flawlessly... whats going on?

[Mavrick]

Try removing your eyes one at a time and clean them. Then reassemble and test her out. My bet that's it.

[Squishy OWNS YOU!!]

I would send it to impact PB because it is under angel force warrenty. And they have to inspect the board and either or, fix it or give you a new board.

[WDP Shooter]

I just cleaned my eyes, and I even unplugged them from the board. I unplugged the solenoid from the board too. when I just turned it on again, the LED is still going nuts. I plug the solenoid in and that is going nuts too...

As for the warranty, I hope Ken or someone can confirm this. If so, I will be up at Impact tomorrow to get it fixed or replaced..

[Mavrick]

Sounds like an MT is what you need. Good luck, they are all stand up guys and will resolve your issues and get you back on the beam!

[Who?]

I would bet dimes to dollars you will be taken care of today :) Let us know how you made out!

[nalby]

check to see if your trigger is pushing in on the sw when not depressed

[WDP Shooter]

I think that my fly is posessed by the elves in black that occupied my emags. I was pissed, and went to my buddies yesterday to show him the problem and perform an exorcism, and it worked perfectly with the TADAO board. Has anyone experienced "fluke" issues that are wierd like this? I dunno. Wonder if it needed a rest after the day, I had put over 2 cases thru my fly the other day.

hmmm....