PDA

View Full Version : Why is My GAt only firing on the release

gijoe1254
02-11-2006, 09:07 PM
I have an 06 angel Gat, and it is only firing on the release of the trigger. When I pull the trigger once when i turn it on it sits for 2 seconds than BAM the eyes turn off. It;s doing this becasue the release of the trigger seems to be activating the switch. I need some Help ASAP!
PaintballStar18
02-11-2006, 09:47 PM
Its the way your trigger is set up...

The screw in the middle of the trigger is too far out. Move it in a little at a time until the problem is solved.
gijoe1254
02-12-2006, 09:18 AM
tried that and it is still firing on the release.
gijoe1254
02-12-2006, 10:42 AM
backed the trigger activation screw all the out and all the way in and the marker is still only firing on the return of the trigger. I guess release isnt the best term to use. it fires when I pull the trigger release it and it comes to a stop at it's original position. I could really use some help
josh_hill
02-12-2006, 12:09 PM
Open up the grip panel and make sure that the leaf is going through the optoswitch like it should. Make sure it's not bent funny or out of place.

Aside from that, try changing other parameters of your trigger set up as well. More than likely if you adjust the vernier wheel and the front screw so that your trigger's a bit sloppy then you could adjust the toe and get it to fire correctly. Then you can fine tune the trigger from there.
gijoe1254
02-12-2006, 05:33 PM
tried it and it still seems to be only firing on the release. I took out the board and waved an allen key between the opto siwtch and it behaved like the trigger, it wouldn't register anything untile I pulled the allen key out. I don;t know what else to do. If anyone else has had this prolbem and has found a solution please post
josh_hill
02-12-2006, 07:47 PM
That's crazy.....you need to get ahold of one of the Master Techs asap.
OverweightAngel275
02-13-2006, 12:46 AM
That happened to me too when I decided one night to mess with the trigger, and I did the same exact thing took the board out and it did that too. I put the board back in messed around somemore and it somehow went back to normal. But like josh_hill said, you sould call an MT.