**Angel problem please help**

[AngelDude]

OK,im running a 2k2 angel w/ a lil over 50k on the board,i had been using a 450 output tank and it worked fine,until i let my friend use his 800 psi output tank on it.The next day the gun wont work and my lpr is at 25!w/ the 450 output tank.I try an 800 output tank and my lpr goes back up to 65.But when i go to the chrono w/ this tank on it my volocity screw is all the way out and chronos 217 so i screwed it all the way in and it chronos 217 again,and i am not getting the range i usually do.Im thinkin its either my mini reg or my tank but w/ a different tank the reg was still messed.Btw,my dwell is at 14.

PLEASE HELP


Thank-You

[Jedrith]

You either want to try to get someone looking at the LPR or the minireg...it could be the minireg, because of the lack of air to your gun.

[2k1DarkLCD]

Your LPR might be blone, Your LPR is supposed to be between 85-90 PSI....... So you might want to add some shims.......

By the way, if you have a preset, you need a higher preset than 450..... Angels need more than that to work efficiently.......Your mini reg might need cleaning, and relubing...... You might also want to take a look at your LPR and valve, make sure they are not dirty or clogged........