whatchmacallit

[peppermint rhino]

i was down at the field this past sunday and i saw this piece on a 06 speed that belonged to a guy i kno. it was out of the lpr tube and it displayed the number of bar that the lpr was putting out. It wasnt the normal guage device from the angel tool kit it was only slightly bigger than the one knocker the knocker but i still wanna kno what it is, if itll work on an 05 speed and where i get one. I kno thsi is the 05 speed forum but i saw it on an 06 speed and i wanna see if i can put one on my 05 speed.

[RangerJoe]

I belive i know what you are tlaking about. I have an lpr gauge that i bought from bob(had also lpr tools and ram tools) it showed pressure in bars but mine is smaller. If it was the one i am tlaking about yes you can put in on your 5peed. And the purpose (if still teh one im talking about) is just to check the lpr pressure.
http://secure.fixmyangel.com/catalog-product250 < link to what i have (cant see lpr gauge)

[peppermint rhino]

no i kno what the purpose of the thing was. idk for sure so ill take ur word for nwo but from what it looke like it seemed that the thing was meant to be there permanetly or untill u wanted to remove it, like u coud play with it on there if u wanted

[RangerJoe]

Well to put something on your lpr coveryou just it screw on. So it was an actuall gauge or..

[peppermint rhino]

it was a guage. but it was only like half an inch in diameter. it went from 1-10 and said "BAR" on the bottom half of the guage and the 1-10 lines were on the top half

[eXlax]

http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=LUifj0BmaVafcAOB9HpfJ0qyJWVaRq3d23U=?Pro ductID=sNqsFAY7%2ebcAAAD3ltOlA_2s

Is this it?

http://secure.fixmyangel.com/catalog-product581

Or this?

[RangerJoe]

Yup im looking at mine right now. Its only half inch long it says bar and a big A in teh middle at bottem. Itgoes from 0-10 wiht a 6 in middle. Al this is a smaller version of the standard lpr. It is in BAR in stead of PSI. If you look in your manual at the back it gives some coversions. Here just looking at my manual:
1 Bar= 14.5038 psi
1 Psi= 0.0689476 Bar
Hope this helps

[RangerJoe]

Does this help?

[eXlax]

I think it's the gauge in the first link I posted up there.

[Presto333]

ya its just a regular gauge but in metric. BAR is everyone else's term instead of psi.

But watchamacallit would be the technical term, a thingamajigger is also acceptable, lol

[whitepimp259]

ya its just a regular gauge but in metric. BAR is everyone else's term instead of psi.

But watchamacallit would be the technical term, a thingamajigger is also acceptable, lol
For a second I thought so said a raciest word...

[peppermint rhino]

thank you very much tahts exactly what i was talking about i just didnt kno the proper name for it and as far as the,

But watchamacallit would be the technical term, a thingamajigger is also acceptable,

comment goes, i used that word to get peoples attention not just "whats this thing do" or "where do i get one of these?" notice i didnt use either of ur two terms when i gave my initial descreption of the item itself, jsut in the thread title

[Presto333]

thank you very much tahts exactly what i was talking about i just didnt kno the proper name for it and as far as the,



comment goes, i used that word to get peoples attention not just "whats this thing do" or "where do i get one of these?" notice i didnt use either of ur two terms when i gave my initial descreption of the item itself, jsut in the thread title

was just a joke, i hear what ur saying