PDA

View Full Version : Angel problem (shooting)


ctjz28
03-08-2003, 07:07 PM
I pull the trigger and the gun fires but the bolt doesnt come back for about 15 seconds. Then I have to pull the trigger a few times to get it to fire again. Anyone seen this before and what could it be?

2k1DarkLCD
03-08-2003, 09:20 PM
It sounds like your 14 way is acting up, and causing the bolt to stay forward.

What is your dwell set at? it should be around 14-16....and you might want to check your LPR to make sure it is at the correct setting which is 85-90 PSI......

I think your 14 way might be getting dirty or clogged, or you might have a faulty wire connection between your 14 way, and the gun......

WarpedKid02
03-08-2003, 09:36 PM
Check your ball detent as well. If it is really tight, it could cause your bolt to stick forward. Make sure that it is only finger tightened.

tosa
03-09-2003, 06:20 PM
Check your 2 pin plug is connected to "sol", not to "hop".