PDA

View Full Version : Intelli and TAG Cheetah board ?

Deanomatic
02-06-2006, 11:20 AM
Now obviously TAG is somewhat a competitor but right now they as far as i know have the only Halo board with reverse anti jam.

And since i play a lot of reball this is the only feature i would be getting the board for, but at the same time im hoping it would be possible to combine it with the intellifeed the MTs are sending out.

we went over this somewhat in the hopper forum, and i got some great answers from mavrickman, but no definitive answer if intellifeeding it would remove the "reverse" feature of that specific feature or rather "override" it ?

If so then i might as well stick with the stock board or go with the much cheaper V35 board from angry or similar.

thx :)
Trigga Nometry
02-06-2006, 12:25 PM
Here is what I said in that Hopper thread:

I have run about 3 cases worth (about 6,000 rounds) of Reballs through the MT Intellifeed (I still call it the Master Technafeed lol) and have yet to have a jam in that set-up using a stock Halo board. Of course, I always keep my Reballs clean and do not let them get dirty so that probably helps.

I have a Cheetah too but I do not want to mess with that board until I can simply plug the new intellifeed into it. The prototype intellifeed I have right now is soldered onto the stock Halo board and I don't want to take solder to a $80 board.

When the MT Intellifeed is sold, it'll be a plug in with no soldering needed. When I get that, then I'll try the new system with the Cheetah and show you via video that the new MT Intellifeed still retains all the boards features.
Deanomatic
02-06-2006, 03:11 PM
yup i saw after i posted this.. i think we crossed threads in the same time span ;)
Carapace
02-23-2006, 02:27 PM
Dude, i'm going to §§§§ a brick when this happens...... seriously....
Trigga Nometry
02-23-2006, 02:48 PM
Dude, i'm going to §§§§ a brick when this happens...... seriously....Ahhhhh...the waiting is killing me too.
Devs
02-23-2006, 10:27 PM
but... don't you already have it? or is the prototype drastically different from the finished product?
Trigga Nometry
02-23-2006, 10:30 PM
but... don't you already have it? or is the prototype drastically different from the finished product?I have to prototype but haven't tried it with the Cheetah because the prototype involved soldering on the board. No way am I doing that to a $80 Halo board lol.

As I understand it, the released version will not need any soldering.