2 newb questions

[coldpizza721]

1)i just got a halo b and dont no wht hopper setting on my gun to use.Its prolly FAST or SFAST.cud some1 just verify that for me.
2)i have the regular board and it says mode4 is ramp mode.Im guessing ramp nd psp ramimg is the same..could some1 also explain to me how this mode works
thnk you

[paintreliever]

first of all, what board version do you have? it should say when you boot the gun up

i had 3.5 and i put my halo settings on fast so i wouldnt chop, then the ramp mode on mine was start ramp at 8 bps, ramp to 15, i just used semi and put the tr on 22

but, if you want psp and all the other modes out, you can buy a tadao board for it, that will run you 150
or
you can send it out to one of the sponsors at the top right of the page and they will flash your board to the newest version with psp and all those modes for 25

[coldpizza721]

i have 3.2....right now i dont rele have the money 4 a tadao and if i did id prolly just consider getting a better gun like an 05 or 06 speed or something.......so rite now i shud just keep it on semi mode?

[paintreliever]

thats what id do

[BoB]

Fast should do you fine. Depending on how fast you can actually shoot, you will need to fine tune. Also, if the paint is really brittle, you will want to lower hopper speed and TR1 and maybe bump up dwell a little.